Hi.
The notebook is an Olivetti Xtrema 426s, PII 266 with ES1878
sound onboard.
Knoppix doesn't configure the soundcard.
I can load the ES1868 or SB driver (both use sb.o) with sndconfig or
manually with modprobe, but all I get is stuttering sound.
Sounds like some DMA problem.
The soundcard uses port 220, irq7 or 5, dma 0 or 1. I tried several
combinations, all the same.
I remember that I always had problems with the kernel sound
drivers, especially on redhat based distributions. That's the reason
why I use alsa, because the soundcard works fine with alsa.
Is it possible to integrate alsa in knoppix? Did someone already try
this out?
p.s. testet with Knoppix 3.1 und 3.2
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$78.99
20 GB 12 10 8.4 6.4 IDE 3.5" PATA WD Seagate IBM Quantum Samsung Maxtor HDD
$19.18
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$112.00
Seagate EXOS X16 16TB 256MB 7200rpm 3.5" SATA 6Gb/s Enterprise HDD ST16000NM001G
$139.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HP 4TB 3.5" 12Gb/s 7.2K SAS Hard Drive P/N: 793674-001 / 803634-001 / 695597-004
$14.87
Samsung 1TB ST1000LM024 2.5" SATA Hard Drive
$12.99
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.32
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99