Results 1 to 4 of 4

Thread: New HD Overclockix Install Problems

  1. #1

    New HD Overclockix Install Problems

    Yesterday I installed Knoppix to a HD partition, but as it was 3.2, it could only run the outdated knx-install command. Therefore, I had difficulty getting my partition icons onscreen like I am used to with live-cd knoppix. I didn't want to download the newest Knoppix image, but noticed that I had a copy of Overclockix (complete with install-knoppix command) handy.

    So I put that on a partition and it works great. There are a couple problems, though, which I would be grateful if somebody could help me with.

    First, I like to clean up my desktop and only keep three drive icons on it (my Windows C partition, my E partition which I use as download/mp3 storage, my Linux partition and my CD-ROM) - the others (I have a number of other partitions) are rarely used. I put these other icons into a "Misc" folder on my desktop and everything is nice and neat. The problem is, when I reboot, all of the icons are recreated! How can I stop this?

    Also, on one of my networked computers (horrible E-Machines with onboard Intel graphics with a Samtron 75V monitor), it always loads up with an undesirable resolution (1152xI-Forget-Exactly). The computer isn't endowed with lots of RAM, so I want it to run at a quicker 800x600 res. When I change the res, though, it doesn't properly redraw the desktop (I lose the taskbar and a large chunk of the rest of the desktop!). I think, "OK, I need to reboot and it'll draw the desktop properly." Sure enough, when I reboot, it goes right back to 1152x???. Is there any way to actually save my configuration changes?

    I noticed as well that all of my Firefox tweaks (I close the Bookmarks taskbar, make yahoo my home page, etc) all disappear, too.

    I have a feeling that this can all be fixed with minimal effort, but I just don't know what to do!

    Thanks for any help,
    Dave

  2. #2
    Senior Member registered user
    Join Date
    Jul 2004
    Location
    Wisconsin, USA
    Posts
    536
    To keep your icons the way they were:

    chmod 0 /usr/bin/mkdesktophdicons

  3. #3
    Okay, I figured out how to save the config for the resolution (it's now at a much better 800x600).

    I still have the problem where everything I do gets lost when I reboot (ie. Mozilla Firefox settings and bookmarks, the USBMouse, SMBMount icons and "Release Notes" file keep getting put back on the desktop after reboot). I want them moved to a "Misc" folder on the desktop so they don't add to clutter. I tried running that chmod line that was offered by another user here, but it didn't help me...

    Is there some way I can turn off the autoconfig? Everything's configured the way I like it, I'm not adding any new hardware... I just want to make changes to fonts and whatnot and not lose them every time I reboot!

    Please help a newbie who's down on his luck,
    Dave

  4. #4
    Just another note, I have made sure that my drives are not marked "read only". Is there a possibility that my Firefox directory is still read only? That would seem to explain why it won't save my bookmarks or home page upon reboot.

    Dave

Similar Threads

  1. Overclockix cannot install to HD
    By digiplaya2005 in forum Hdd Install / Debian / Apt
    Replies: 6
    Last Post: 08-31-2005, 03:10 PM
  2. Overclockix hd install.
    By kevtech in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 07-14-2005, 10:29 AM
  3. Overclockix 3.8
    By encryptedmatrix in forum General Support
    Replies: 0
    Last Post: 05-01-2005, 04:39 PM
  4. Overclockix
    By jshah329 in forum General Support
    Replies: 17
    Last Post: 03-23-2004, 08:27 PM
  5. Problems installing Knoppix and Overclockix
    By Drewby in forum Hdd Install / Debian / Apt
    Replies: 4
    Last Post: 11-03-2003, 04:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES

$199.99



HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD picture

HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD

$249.99



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon

$846.19



Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears picture

Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears

$199.00



Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001 picture

Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001

$149.99



Supermicro 5018A-FTN4 Rack Server - Black picture

Supermicro 5018A-FTN4 Rack Server - Black

$125.00



1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS picture

1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS

$299.00



SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD picture

SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD

$90.00