-
Knoppix hangs at startup with SCSI detection(aic7xxx module)
hi,
when I try to boot KNOPPIX_V3.2-2003-03-21b-EN from CD in ide-cd drive the system hangs on the SCSI card detection. Boot with "noscsi" works fine. the scsicard is a adaptec 2940 u2w with a plextor 12/10/32s cdwriter attached.
is there a solution for this problem?
thx, Sjoerd
-
Senior Member
registered user
I can personally attest that Knoppix does in fact work with Adaptec scsi controllers. I have the same model. Have you tried booting with the scsi drive disconnected just to see if it will load the module for the scsi controller? Do you know that your cables are OK and connected tightly?
-
Originally Posted by
rickenbacherus
I can personally attest that Knoppix does in fact work with Adaptec scsi controllers. I have the same model. Have you tried booting with the scsi drive disconnected just to see if it will load the module for the scsi controller? Do you know that your cables are OK and connected tightly?
no, thanks i will try that. Although under XP and SuSe I have no problems recognized and burning.
-
Senior Member
registered user
If it works under SuSE then it should work under Knoppix but obviously it doesn't. I just threw out a few guesses really. Sorry I can't be of more assistance.
Similar Threads
-
By Filip Rosco in forum Laptops
Replies: 3
Last Post: 03-13-2005, 04:43 PM
-
By jdtommy in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 05-22-2004, 10:48 PM
-
By coldlamper in forum Hardware & Booting
Replies: 0
Last Post: 12-06-2003, 03:33 PM
-
By danielgarcia in forum Hardware & Booting
Replies: 4
Last Post: 04-11-2003, 06:28 AM
-
By joe in forum Hardware & Booting
Replies: 3
Last Post: 01-22-2003, 04:39 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99