I've been sticking with 3.3 since I download it a while back but I came to reinstall it today as I need a linux machine for programming on.
Anyway.
I did all the partioning and let it get on with the install. It finished quite the while later and decided it wouldn't boot. I went through the procedure again and it still failed. I decided it was evidentally my partitions and started again.
Now when i boot it tells me there is no memory and forces me to use Shell, which won't let me work as root so I can try repartition using cfdisk.
Any suggestions? (I'd really prefer not to dig out a windows disk if I can)
EDIT; it's letting me view the entire contents of the partions, just not booting into KDE, I'm guessing it could be something to do with lilo?
Fortinet FortiGate-40C Network Security Firewall
$37.50
Cisco ASA 5520 Adaptive Security Appliance
$42.56
PALO-ALTO NETWORKS PA-3050 SWITCH
$44.99
Ubiquiti Networks USG Unifi Security Gateway Router/Firewall
$29.95
SonicWall TZ300 Power Supply Wired Firewall Router Network Security Appliance
$14.50
OPNsense six-port Gigabit router/firewall on Lanner FW-7535 hardware
$69.00
Dell SonicWALL TZ300 | Firewall Security Appliance
$24.99
Fortinet Fortiwifi 60D FG-60D Security Appliance Firewall / VPN w/ AC Adapter
$34.97
Sonicwall TZ350 Network Firewall w/ AC Adapter
$99.99
Cisco ASA5505-SEC-BUN-K9 Firewall Security+ 25 VPN Peers 512MB ASA9.24 /W Power
$39.99