-
"/dev/modem" link disappears at reboot of hdd inst
Hello everybody
A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
I was suggested to:
"The next time you reboot, it should suffice to only create the Ports
# mknod /dev/ttySHSF0
# ln -sf /dev/ttySHSF0 /dev/modem"
But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
At this point I guess the real problem is Knoppix and not the drivers...
Any suggestions on how to make the link persistent?
Regards
Artikid
-
Senior Member
registered user
Re: "/dev/modem" link disappears at reboot of hdd
Originally Posted by
artikid
Hello everybody
A small recap of my predicament: I've got a HSF connexant modem on laptop where I've installed Knoppix 3.4.
I've succesfully installed Linuxant drivers (debian package) for the modem, the only problem is that at reboot the /dev/modem link disappears.
I was suggested to:
"The next time you reboot, it should suffice to only create the Ports
# mknod /dev/ttySHSF0
# ln -sf /dev/ttySHSF0 /dev/modem"
But this is a temporary solution, as the /dev/modem link disappears every time I boot....and I have to go through the procedure once again
At this point I guess the real problem is Knoppix and not the drivers...
Any suggestions on how to make the link persistent?
Regards
Artikid
Is only the link /dev/modem disappearing or is /dev/tty/SHSF0 being removed also?
/dev/modem is probably being removed by this section of the /etc/init.d/knoppix-autoconfig script:
Code:
# Delete obsolete links and files before starting autoconfig
if ! checkbootparam "nohwsetup"; then
rm -f /dev/cdrom* /dev/cdwriter* /dev/mouse* /dev/modem* /dev/scanner* \
/etc/sysconfig/i18n /etc/sysconfig/keyboard /etc/sysconfig/knoppix \
2>/dev/null
fi
so the simplest solution would seem to be to edit the script to remove this deletion.
However, this MAY cause problems. I have done a similar 'fix' to prevent /dev/cdrom from being removed which seemed to work OK with 2.6 kernel but resulted in an additional /dev/cdrom being created each time the 2.4 kernel was run until I had about 10 of them.
I think what is needed is an additional startup script to run as the last boot script which checks for /dev/modem & creates one only if there is not one existing.
Also, /etc/init.d/knoppix-autoconfig is only used for a knoppix or beginner style HD install, for a Debian install I'm not sure what the startup script is.
Similar Threads
-
Replies: 5
Last Post: 06-12-2008, 01:07 AM
-
By wsg in forum Hardware & Booting
Replies: 23
Last Post: 10-23-2004, 12:06 PM
-
By oman in forum General Support
Replies: 0
Last Post: 08-03-2004, 06:44 PM
-
By beforewisdom in forum Ideas
Replies: 2
Last Post: 04-21-2003, 09:28 PM
-
By Juny in forum General Support
Replies: 4
Last Post: 03-14-2003, 09:02 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$314.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco 2901/K9-V06 Integrated Services Gigabit Voice Router
$69.99
Cisco N9K-C9332C ACI Spine switch 32 ports 40/100G QSFP28 + 2p 10G SFP
$5550.00
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco Catalyst 3650 24 10/100/1000 Ethernet PoE+4x1G Uplink Port 640WAC LAN Base
$35.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
UNCLAIMED Cisco Meraki MS120-24P-HW - 24Ports Ethernet PoE Switch Same Day Ship
$315.00
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00