-
agppart module..
hi..
i use knoppix3.3 ..after booting ..when it stats Starting X11..it gives following error:
Starting X11 [drm:drm_init] *ERROR * Cannot initialize the agppart module
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: init_modules: Cannot allocate memory.
Hint: insmod erroe=rs can be caused by incorrect modules parameters.
You may find more info. In syslog or the output from dmesg.
/lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: insmod /lib/modules/2.4.24-xfs/kernel/drivers/char/drm/i810.o: failed.
wht is mean by this & why this error occured?
though X server starts after that & everything works fine.
thankx.
-
Senior Member
registered user
I also was getting this error with knoppix 3.3 & with 3.4 using the 2.4 kernel (also i810 vid card). Switching to 3.4 / 2.6 kernel fixed it.
Agpgart has to do with video card acceleration, I could not use graphics-intensive applications like tuxracer until it was working.
-
IIRC I had the same memory problem with Knoppix 3.3 and i810, and solved it by adding a line for more video memory in /etc/X11/XF86config-4 :
Code:
Section "Device"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "i810"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
VideoRam 16384
EndSection
-
Senior Member
registered user
I have also added video memory but still the agpgart module will not initialize unless I use the 2.6 kernel.
-
Hmm, makes me wish I'd remember what I did to make tuxracer run on 3.3. Wasn't there 3 different i810 display adapters to choose from, but only one worked (after adding memory). Easier to try a newer version of knoppix though.
Similar Threads
-
By madmadmod in forum Customising & Remastering
Replies: 0
Last Post: 01-15-2005, 05:14 PM
-
By Jansi in forum General Support
Replies: 0
Last Post: 08-06-2004, 02:45 PM
-
By MrAhmad in forum Customising & Remastering
Replies: 1
Last Post: 09-06-2003, 11:45 AM
-
By corwinspyre in forum Hardware & Booting
Replies: 1
Last Post: 08-15-2003, 08:38 PM
-
By Myrdhin in forum Customising & Remastering
Replies: 2
Last Post: 08-01-2003, 02:54 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS
$299.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00