-
Help a Noob
Hello I am new to Knoppix it was suggested to me by a friend... The interface seems excellent. I just seem not to be able to connect to the web. I can get my Modem to connect to with Kpp just fine my problem is setting up Netcardconfig.. how do i come up with the correct gateway ip and nameserver.. and the rest of the values that go into netcardconfig? Is there a command that i can run to get me the correct ip's?
Thanks in Advance..
-
Senior Member
registered user
Re: Help a Noob
Originally Posted by
_StREAk_
...I am new to Knoppix... I just seem not to be able to connect to the web...
Don't worry, we were all n00bs at least once. While I probably can't help you directly, there are some things you can tell us to make things easier:
1. Which version of Knoppix are you running?
2. More about your hardware. Which modem are you running? As suggested for the Hardware forum: "Please post a full output of lspci -v if your hardware is not detected, and all relevant information about your hardware."
That should help you get started. Good luck and welcome to Knoppix. I think that you will find it worth the effort.
-
Senior Member
registered user
You need to use the same settings that you would normally use when connecting in windows. Go into the control panel under networking and copy them down and then you have the settings you need. Or use the run command and winipcfg (I think thats right) and get the settings from there. If you did not have to enter any of the settings in windows then you are most likely using DHCP to get the settings so just use this in netcardconfig.
Similar Threads
-
By newpants2003 in forum MS Windows & New to Linux
Replies: 1
Last Post: 03-04-2005, 08:08 PM
-
By cannonfodder in forum General Support
Replies: 14
Last Post: 02-11-2005, 04:49 AM
-
By shiv_379 in forum MS Windows & New to Linux
Replies: 1
Last Post: 01-15-2005, 09:48 PM
-
By Guitarplaya512 in forum General Support
Replies: 2
Last Post: 03-02-2004, 04:57 AM
-
By waynejkruse10 in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 10-23-2003, 01:53 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 4x Nvidia GPU AI Server 2.1Ghz 16-Core 192GB 2x10G SFP+ 2x2200W
$1250.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99