-
Knoppix 3.6 loading problem
Hi. Here's my problem:
I burnt the knoppix 3.6 CD, i booted it. Then "boot: " appeared. I've pressed <Enter> (also i tried to write boot: knoppix lang=en but it makes no sence) and two lines "Loading...... " appears and then - black-screen, nothing happens, computer is not responding. I looked through the FAQs ant manuals but i couldn't find anything. Need help
-
Looks like the GUI isn't loading, Try one of the following
screen=1280x1024 (or what you prefer)
vga=normal (to disable framebuffering)
fb1280x1024 or fb1024x768 or fb800x600 (choose one for framebuffering)
xmodule=ati|radeon|fbdev|vesa|savage|s3|nv|i810|mg a|svga|tseng
set the refresh rate with vsync=?? and hsync=?? (check the monitors support)
If you have less than 128MB RAM try desktop=fluxbox|icewm|twm|wmaker|xfce (choose one)
Also try some no-options like noapic noscsi....
-
-
I think I have a similar problem:
CD boots ok and get the "boot" prompt
but then get the following:
Loading linux24......................
Loading minirt24.gz.............
Ready.
<cursor appears on this line>
The system then hangs.
I have tried the options suggested by Marcus but these either make no difference or just clear the screen before the system hangs. I have also tried various other options including "failsafe", noapic etc etc.
My monitor is a LCD connected via DVI to an ATI radeon 7500 (if this helps?).
Any suggestions welcomed.
TIA
-
In case it helps anyone, my problem turned out to be a faulty CD. I reburnt it at a much slower speed (*2) and am now up and running (in fact this is posted from Knoppix).
-
hello
i am having similar problems.
the boot goes through loading the usb devices (i have a usb hp printer) but then it dies. the screen goes blank, my moniter goes into standby and there is no disk activity. I have already tried reburning my cd at a slower speed and the situation has not changed. Please help!
-
i have a desktop, athalon XP 2400+, NVidia Gforce 4 MX440 graphics card, 512 megs of ram and windows 98 SE. please let me know id you need anything else
-
Originally Posted by
newb
hello
i am having similar problems.
the boot goes through loading the usb devices (i have a usb hp printer) but then it dies. the screen goes blank, my moniter goes into standby and there is no disk activity. I have already tried reburning my cd at a slower speed and the situation has not changed. Please help!
I think you should try to unattach your printer or try a cheat code "nousb" when booting (without ""). Later you would instal your printer manually. I hope it'll help you.
About reburning the .iso in small speed (4x) it didn't help me, the same "system halted" problem. Does burning the .iso which is located in NTFS or FAT make any sence?
Similar Threads
-
By znai in forum Hardware & Booting
Replies: 4
Last Post: 10-26-2005, 10:58 AM
-
By k-user in forum General Support
Replies: 7
Last Post: 05-26-2004, 07:31 PM
-
By cipher999 in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 04-16-2004, 11:01 AM
-
By Daishi in forum General Support
Replies: 2
Last Post: 02-15-2004, 04:28 PM
-
By Asaf-g in forum General Support
Replies: 0
Last Post: 02-10-2004, 07:10 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 4x Nvidia GPU AI Server 2.1Ghz 16-Core 192GB 2x10G SFP+ 2x2200W
$1250.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00