If it's any help, I have that module in directory:-
/lib/modules/2.4.26/kernel/drivers/sound/emu10k1/
If it's missing from there, that may be your problem. If it is there, then modprobe doesn't seem to be looking in ht eright place!
New to Knoppix, and i must say this little CD is freakin' amazing!! My problem is i have no sound. My soundcard is a Soundblaster Audigy ZS. Running soundcfg finds my exact card, but at end of configuration i get this error.
"The Module used for your card emu10k1.o is not in your module search path. Please verify your kernel modules are correctly installed"
I read some man pages on modules, and found out how to Load the module, but i get this.
knoppix@ttyp0[knoppix]$ /sbin/modprobe emu10k.o
modprobe: Can't locate module emu10k.o
knoppix@ttyp0[knoppix]$
Am i doing something wrong? How do i get this module, and get it installed so i have sound?? Thanks for any help.
If it's any help, I have that module in directory:-
/lib/modules/2.4.26/kernel/drivers/sound/emu10k1/
If it's missing from there, that may be your problem. If it is there, then modprobe doesn't seem to be looking in ht eright place!
emu10k1.o is in the folder you specify, but sound counfig says the module is not in my search path. how do i know what my search path is? is there a way to change it?
Try reinstalling it with modconf. Also navigate to here Select kernel/sound/oss modules and go to
sb - 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support
and add this module for added soundblaster support.. I also added the i810_audio for further support. I don't know if they will help but you can give it a try. There are also modules that you can check out.
thanks for the VERY fast response!
sorry. i should have said i was using the alsa code rather than OSS. I tried a couple of other things, but i forgot which ones (d'oh!)
sound is working now. just not MIDI.
I'm searching the forum for MIDI help, but do you happen to know any tricks?
I'd love to get right to installing soundfonts, rosegarden, etc... but i gotta take baby steps!
edit: i don't know... maybe it's using OSS. When i whent into "sound System" and just chose OSS it worked fine. but when i chose ALSA, I got an error. hmmm...
There are alsa modules that you can check to see if they work. But here is the one listed above by stukennedyuk.
Select updates/alsa/pci/emu10k1 modules:
snd-audigyls - (No description available) │
│ snd-emu10k1-synth - (No description available) │
│ snd-emu10k1 - (No description available) │
│ snd-emu10k1x - (No description available)
There is also an emu10k1 that does not use alsa kernel/sound/oss/emu10k1.
Any of the above might help, check out modconf.
When you do a modprobe........you don't put the extension of that file.
What you should do is:
su
modprobe emu10k1
<smacks forehead>
Thanks shah!
HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421
$269.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
Supermicro 1U Server X9DRW-3LN4F+ 2x E5-2680 2.7ghz / 128gb / 8xTrays / 2x 700w
$229.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
HP ProLiant MicroServer Gen8 | Intel XEON E3-1220L V2 | 8GB RAM | NO HDD | 4 BAY
$249.99
Supermicro Server 505-2 Intel 2.4GHz 16GB SYS-5018A-FTN4 - pfSense Compatible
$220.48
DATTO-1000 Mini PC Micro Server 8GB RAM
$67.48
HPE ProLiant MicroServer Gen10 Plus Xeon E-2236 3.40GHz 64GB RAM ILO5 No HDD
$699.95
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00