I use this command
iwconfig eth0 essid "your essid" enc "your WEP key, if there is any"
I don't expect anybody to walk me through it, but could somebody point me in the direction of where to look for info on setting up a wireless lan through linux? What I'm trying to do is set up an Ad-Hoc 802.11b network between a Linux box (primary) a Windows laptop and a windowsCE PDA.
Keep in mind I'm new to linux and network were never my thing under windows anyway.
I use this command
iwconfig eth0 essid "your essid" enc "your WEP key, if there is any"
Originally Posted by garyng
Error for wireless request "Set Encode" (8B2A) :
too few arguments
I have a standard PCI wired network adpter and a my WiFi is also PCI. I tried eth0 and eth1, sme response. My ssid is fordprefect and I am not useing wep
Run wlcardconfig. It will walk you through the setup. You may need to run netcardconfig afterwards (at least I do) to set up dhcp.
Well, that sort of worked, maybe. But I can't find it with any other systems. I have a WinCE handheld and an XP laptop on the same chanel with the sameessid and wep and they can't see the desk.
Here is the complete output from the file you had me run:
+ '[' NO = NO ']'
+ rm /etc/pcmcia/wireless.opts
+ echo '# Wireless LAN adapter configuration file /etc/pcmcia/wireless.opts'
+ echo '# written by wlcardconfig (C) Eckhard Rüggeberg'
+ echo '# Sorry for the clumsy syntax, but I have to have everything in one'
+ echo '# line for every card. This is a MaGiC nUmBeR.'
+ echo '# For the original file see in /KNOPPIX/etc/pcmcia/'
+ echo ''
+ echo 'case "$ADDRESS" in'
+ writeline
+ OURLINE=
+ '[' -n '' ']'
+ '[' -n Ad-Hoc ']'
+ iwconfig eth0 mode Ad-Hoc
+ OURLINE= MODE="Ad-Hoc";
+ '[' -n 11 ']'
+ iwconfig eth0 channel 11
+ OURLINE= MODE="Ad-Hoc"; CHANNEL="11";
+ '[' -n '' ']'
+ '[' -n '' ']'
+ '[' -n '' ']'
+ '[' -n '' ']'
+ '[' -n '' ']'
+ '[' -n fordprefect ']'
+ iwconfig eth0 essid fordprefect
+ OURLINE=ESSID="fordprefect"; MODE="Ad-Hoc"; CHANNEL="11";
+ OURLINE=*,*,*,00:10:7A:4A:05:B9) ESSID="fordprefect"; MODE="Ad-Hoc"; CHANNEL="11"; ;;
+ echo '*,*,*,00:10:7A:4A:05:B9)' 'ESSID="fordprefect";' 'MODE="Ad-Hoc";' 'CHANNEL="11";' ';;'
+ echo esac
Is there something else I need to do to connect?
if you don't use WEP, just say
iwconfig essid "your essid"
Turns out one of my neighbors has a Wlan, so I decided to go ahead and use a WEP pasword. However, after running again, my other systems still can't see my linux box.
do you have a WLAN router ? I am confused with your network setup ? You only have 2 machine each has a WLAN card ?
I have three machines, running three completely different opperating systems, each with it's own WiFi card. I'm trying to set up an Ad-Hoc network, NOT an infrastructure network.
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$272.00
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$379.00
Lenovo SR530 Server (Intel Xeon Silver 4110) (3x 800GB SSD) (NO OS) (48GB RAM)
$599.00
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$240.00
HP ProLiant DL360 G9 Server 2x Xeon E5-2690 V3 24 Cores P440ar 128GB DDR4 1x SSD
$279.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
DELL POWEREDGE R730xd 12LFF 2x 8 CORE E5-2620V4 2.1GHz 32GB RAM NO HDD
$264.00
Dell PowerEdge R430 1U Server 2x E5-2690 v3 2.6ghz 24Cores 64gb 4Trays H730 2PSU
$279.99
HP ProLiant DL360 Gen9 Server 2x E5-2620v4 2.1GHz =16 Cores 32GB P440AR 4xRJ45
$220.00