-
Senior Member
registered user
need more tmp space
I've just installed a DVD drive but cannot copy any DVD's because k3b says it doesn't have enough space in /tmp. I assume it will need 4+ Gig to load in the whole DVD file.
I have the following setup:
crashedagain@desktop:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda8 4330736 3305380 805364 81% /
/dev/hda1 4798736 4305360 493376 90% /mnt/hda1
/dev/hda5 3125220 2521548 444916 86% /mnt/hda5
/dev/hda7 26537392 10462432 16074960 40% /mnt/hda7
crashedagain@desktop:~$
hda1 is windows O/S, not much used. hda7 is vfat data drive. hda 5& hda8 contain linux operating systems (no data). Currently running kanotix bh9a on hda8.
As can be seen, there is enough space on hda7 for whatever k3b needs but the question is 1) can k3b use a vfat drive for it's temp and 2) how do I tell k3b to put it's temp file on hda7.
I don't really want to repartition to leave a huge amount of MT space on hda8 as most of the time it will be unused.
Suggestions??
-
Senior Member
registered user
CrashedAgain,
( 1 ) you may want to use the df -h command, it will output your DiskFree in "human" form: like this...
Code:
root@morpheus:/# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda1 8.0G 3.0G 5.1G 37% /
/dev/hda5 29G 1.2G 28G 5% /home
( 2 ) and, lastly, yes, you can re-direct k3b, or so I found ( not sure if it will work, but it allows you too )... Go to k3b, and select "Settings", then select "Configure k3b", then "Misc" - at the top you can change where K3b will use for "Default Temporary Directory"
Hope this helps,
Ms. Cuddles
-
Senior Member
registered user
Thanks Cuddles. Don't know why I didn't see the setup option earlier...it's just too obvious I guess. and it does work just fine with temp set to a vfat drive.
Similar Threads
-
By polopolo in forum Hardware & Booting
Replies: 0
Last Post: 02-17-2006, 12:15 PM
-
By NAvAP in forum Customising & Remastering
Replies: 2
Last Post: 08-19-2005, 06:52 AM
-
By wiccaan in forum Hardware & Booting
Replies: 0
Last Post: 05-30-2005, 01:04 AM
-
By geordiebiker in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 01-05-2005, 09:19 PM
-
By Rapt0r in forum General Support
Replies: 4
Last Post: 08-16-2004, 12:01 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00