Come on guys. It has been 3 days and no replys.
I have Knoppix 3.6 on one of my machines. I have no problem using it with Samsung SyncMaster 191T LCD monitor however, when I connect the machine to ViewSonic2+ or Packard Bell or Comppaq, and some other monitors, every thing is blurry with lots of lines on it after the initiation of hardware dedection and so on is finished. Paradoxically, I have no video problem when I use my neighbor's 14" IBM monitor. What is going on?
Any help or suggestion is appreciated.
PS: I have tried the same thing with Red Hat. Unfotunately, with the same result.
Come on guys. It has been 3 days and no replys.
I don't know what kind of monitor you have, but it sound like the others are unsupported? Or maybe the refresh rate is too high/low? Another possibility is widescreen monitors, in which case it might be drawing half the next line at the end of the current one.
The only thing I can think of is to check and see what it's being detected AS, and if switching to a console (ctrl-alt-1) makes a command line at all visible. From the command line there are probably some things others could suggest you try, like looking at your /etc/X/xfree86.conf file
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
$209.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00