Knoppix should have nothing to do with which OS you have installed to the hard drive. Just make sure that your BIOS lets you boot from the CD before it goes to the hard drive.
i have been lQQin around trying to find out how to run knoppix 3.4. from a hp with xp home edition installed. my boot screen gives everything but the sequence to boot from. i.e fail safe mode ect.. ect... i have success running it from my work cpu which is using xp pro which gives u the choice of which drive to boot from. this is my first foray into a new operating system so i am not to savvy on command lines and such especially when my wife is scared to death that one wrong button and kaboom. i would like to show her linux as i was quite impressed with what i saw with knoppix.
thanx
tom
Knoppix should have nothing to do with which OS you have installed to the hard drive. Just make sure that your BIOS lets you boot from the CD before it goes to the hard drive.
i was afraid this would happen. how to get to the part where it says which drive. xp home ed doesn't have a multiple check box like xp pro has.
thanx
tom
It has nothing to do with XP. It's a BIOS setting. You need to enter the BIOS before XP boots (often but not always done by typing the DEL key at boot time). There should be a setting for which device you boot first from.Originally Posted by ftmhntr
It sounds like you have no experience with BIOS settings. Take some care that you do not change anything that you do not understand, you could do bad things to the computer. If you have problems post back the exact make and model of the computer, someone who knows that model likely can help you.
http://www.knoppix.net/wiki/Download...should_I_do.3F
i havent found a new user to linux (including myself) that didnt get the knoppix disk to boot for one reason or another first time.
i am using a 1 yr old hp with all the bells and whistels, with xp home ed installed. i hit f8 in order to get to the boot up screen. now what. your r right , i don't have any experience with the bios and believe me there is no way iam going to hit any buttons unless i am sure of what i am doing. at work i got to see the knoppix os very easily but by using xp pro. maybe after hitting f8 then i should hit the del button.
thanx
tom
p.s. i dont mean to ignore anyone who post but being a noobie it will take me awhile to figure out how to respond to people individually
no, f8 gets you to the Windows boot screen. Too late. Shut everything down (computer completely powered off). Turn the computer on. Hit the DEL key and stay parked on it until the BIOS screen comes up. If that doesn't work then post back the model of the computer, not just that it's an HP.Originally Posted by ftmhntr
Check the manual that came with the laptop. There should be info in there on how to force a boot from CD or what key to use to adjust your setup options.
some laptops you just have to hit a key to change bootorder.
one I have seen on a few models was to hit "esc" just when the screen started showing the logo of the manufacturer.
ohhhhh!!!!!! i got it now i will try when i get home and let u know how it goes. like i said before i really like the way knoppix version of linux works. thanx againOriginally Posted by Harry Kuhman
tom
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00