Try at boot: knoppix26 (as well as other cheatcodes you use) if the 2.6.x kernel would recognise your sata
Hi, Forum!
I've started Knoppix 3.7 on a Dell Optiplex with two S-ATA HD.
Knoppix didn't find any of them.
The lspci -v I've typed in my system, but I can't print or save it, because the printer isn't installed, else and ...no hd is found, too.
Is here anybody who can help me?
TIA with greetings,
Miksch
Try at boot: knoppix26 (as well as other cheatcodes you use) if the 2.6.x kernel would recognise your sata
Thank you Markus!
I'm going to try it!
Miksch
Good morning forum!
I just have tried it with typing knoppix26, but it didn't match. I've got the following output:
init: version 2.78 - knoppix booting
Has anybody else an idea how I could make Knoppix 3.7 find my S-ATA hd's?
TIA , with greetings!
Miksch
I have a similar problem with my Dell Optiplex gx280. Knoppix 3.7. will notboot Kernel 2.6, with the same symptoms you name.
I can boot Kernel 2.4. though, but it does not find any hard disk.
Kernel 2.6. finds the disks (I think) but then hangs
Please LMK if you find a solution, I will do the same.
hakayati
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Dell HBA330 12GBPS SAS Internal HBA Controller (NON-RAID) PCIe Card J7TNV 0J7TNV
$40.05
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99