I share a similar problem. it becomes annoying to do the same two commands to use the internet.
Can this be simplified at startup?Code:iwconfig ath0 essid **** channel 10 mode Managed key ************* pump -i ath0
hey gang,
I got my wireless card all set up and mastered, the card is autodected and labeled as Ath0. but everytime I boot into Knoppix I need to run the configuration script over, use ifconfig ath0 up, and pump -i ath0 every time I boot into my knoppix (btw, I have a HDD install)
is there anyway I can set this up so that it does all this for me automatically at boot/startup/login?
I share a similar problem. it becomes annoying to do the same two commands to use the internet.
Can this be simplified at startup?Code:iwconfig ath0 essid **** channel 10 mode Managed key ************* pump -i ath0
try adding your configuration to the file /etc/network/interfaces; add something like
iface ath0 inet dhcp
wireless-essid ********
wireless-channel 10
wireless-mode Managed
wireless-keymode restricted
wireless-key1 ****-****-****-****-****-****-**
wireless-defaultkey 1
and it might be a good idea to use tabs (don't know if necessary, though) before the wireless-* keywords.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98