http://purelinux.hollosite.com/savedataknoppix.txt
thats the basics of it.
did you do sudo fdisk ?
Hey Guys,
Heres the complete story:
Lost Windows OS due to "sys.ini" file corruption(source unknown). Had to re-install Win ME on primary HD (a Maxtor 10GB) from the "Restore'/Recovery" CD. Had a secondary HD (a WD Caviar 40GB) already installed at the time of the system "restore".
PROBLEM: All partition & file data on the secondary HD (the WD 40GB) seems to be "lost" gone.
QUESTION 1: Is the data really gone or is just the registry & partition data changed due to the "restore"???????????????.
These are the data recovery steps attempted so far:
1) used FDISK to check the partition info on the WD HD>>> no partition info listed.
2) used Western Digital's "Data LifeGuard Diagnostics" program to check >>> no partition info listed.
3) used "PC File Recovery" program to scan the WD HD for data files >>> found 700+ files which it can't read.
QUESTION 2: How can I use KNOPPIX to access/read/write/ & recover the data ???????????
Have Knoppix on disk & it boots up perfectly (many thanks!! ).
Have read "greenfly's" info on using the GPART program but am not sure exactly how to implement/use it (eg. where & when to type the command line info etc.) and/or what other steps are needed to recover data.
Any help appreciated
Thanks in advance
RGPHNX
PS- I know this info is here somewhere- have searched >>> "Data recovery" & other terms in the forums >>
gives thousands of posts. Have read for hours but can't narrow this down even with filtered searches. I'm not lazy, just need good sound info help.
http://purelinux.hollosite.com/savedataknoppix.txt
thats the basics of it.
did you do sudo fdisk ?
Hi Pureone,
Thanks for the link. Read it.
Question: How do I see the data (using Knoppix GUI) in the first place?? So I can save it!! (Have lots of experience in DOS[batch files etc.] but am a total Knoppix noobe.)
Don't know what "sudo fdisk" is. Do I need to use it first ?? & if so how???
I used the standard FDISK program on the Win ME boot disk to view the HD info.
Please advise.
RGPHNX
sudo fdisk -l is the command you enter in a console to show infomation about the harddrive.
as for seeing data thats rather easy you just click the icon with a harddrive on it to mount c:\ (hda1 in linux) and you will see all your data.
i will add more details to that text file later on. im guessing i left out too much stuff for most new comers to linux.
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
Dell PowerEdge R430 3.5 1U 2x E5-2666 v3 2.9ghz 20-Cores 128gb 4x Trays 2x 550w
$364.99
Energy Saving Low Power 1U Server 1x Intel Xeon E5-2620 V4 8 Core 85W 32GB RAM
$264.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Chenbro NR12000 1U 1x 8m QUAD CORE E3-1230v2 3.3GHz 8GB RAM NO HDD
$239.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$300.00
HP ProLiant DL360 Gen9 Server 2x E5-2620v4 2.1GHz =16 Cores 32GB P440AR 4xRJ45
$229.00