if anyone has a similar problem, here's what i did
ru (to get to the root)
then
mount -o remount,rw /mnt/sdc1
then it worked
=]
hello,
i'm completely new to knoppix but am using it to try to recover some files from a corrupt hard disk unto a usb memory stick.
the usb device appears on the desktop as "Hard Disk Partition [sdc1]" and it will not allow me to copy anything onto it. i get the error message "could not write to /mnt/sdc1/blah.doc"
any ideas on what might be going wrong here??
thanks in advance, alex
btw. i'm using the latest version of knoppix
if anyone has a similar problem, here's what i did
ru (to get to the root)
then
mount -o remount,rw /mnt/sdc1
then it worked
=]
Hi, I'm doing the same thing and trying to recover some files and put them on a memory stick or trying to burn it. I'm running a Dell laptop and it doesn't even have "Hard Disk Partition [cd1]" on the desktop for my USB drive. I have connected a cd burner, but when i wouldn't even let me access it. do you know how I can fix this?
what kind of interface to the burner? scsi, usb, firewire, paralell (printerport on a PC)?
the usb stick might be called ubX or sdX (where X is a number from 1-9 iirc) .
and you might mount it with comand below.
first we assume your drive is ubX
Code:mkdir /mnt/ubXnow we asume it is sdXCode:sudo mount -t vfat /dev/ubX /mnt/ubX -o rw
Code:mkdir /mnt/sdXthis should work in 90% of cases.Code:sudo mount -t vfat /dev/sdX /mnt/sdX -o rw
to find what your stick is called perhaps
might help orCode:dmesg|grep usbthese tewo comands will list a bunch of outputl look for lines like this (from my computer after i incert a usbstick)Code:fdisk -l
anddmesg|grep usb
...
usb 1-4.3: new full speed USB device using ehci_hcd and address 4
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
these two qoutes are somewhat shortened, you most likely get some more lines.fdisk -l
...
Disk /dev/sda: 65 MB, 65536000 bytes
50 heads, 32 sectors/track, 80 cylinders
Units = cylinders of 1600 * 512 = 819200 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 80 63984 6 FAT16
hope this helped you
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant DL360 G9 2x Xeon E5-2690 V3 24 Cores 2.6GHz P440ar 32GB DDR4
$119.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
PowerEdge R710 Rackmount Server 80GB RAM 2x XEON E5520 CPU 4.75TB
$200.00