Hi,
I'm out of lucky trying to install Knoppix 3.8 on a HP DL380 with Smart Array 6i.
Knoppix does not recognizes automatically the disks (RAID 0) , but after "MAKEDEV cciss" inside /dev fdsik recognizes it and I can mount the partitions:
# fdisk -l /dev/cciss/c0d0
Disk /dev/cciss/c0d0: 36.4 GB, 36414750720 bytes
255 heads, 63 sectors/track, 4427 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 * 1 4296 34507588+ 83 Linux
/dev/cciss/c0d0p2 4297 4427 1052257+ 82 Linux swap
# mount
...
/dev/cciss/c0d0p1 on /mnt/mirror type ext3 (rw)
The sad thing is that knoppix-installer can not handle the /dev/cciss/c0d0 and says the installation requirements were not fullfilled...
Any help will be greatly appreciated!
Laurence
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 04Y5H1 High Profile
$17.99