I had the same issue. Then I used the nodma option and it worked. You may want to give it a try.
boot from the knoppix cd starts ok, I see "welcome to knoppix liveCD", and so forth until it pauses awhile at "looking for linux in /dev/scd0", then it says "can't find knoppix filesystem, sorry" then "dropping you to (very limited) shell"
Now I have seen this error on another computer (that cant boot from CD) when it boots from floppy and can't find the knoppix CD, but in this case, it already started booting from the CD, so why can't it find the filesystem there?
I had the same issue. Then I used the nodma option and it worked. You may want to give it a try.
Yep. nodma should do it.
I just came on looking for this same issue and the nodma thingie worked for me too. Thanx guys!Originally Posted by redss
Hi
How do use the nodma option. press f2 at knoppix menu and then at boot: prompt type nodma. ? if that is it then its not working for me it says some kernal not found.
knoppix nodma at the prompt.
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00