did you get it working. have same problem with aspire 1414 wlmi.
black screen, no kde.
Hello guys
I have got an Acer TravelMate 4000, which normally runs under WindowsXP Pro (not for long);
I've tried so far Knoppix 3.7, which runs smoothly and without a glitch, apart from the WiFi drivers, which were not supported yet.
I then downloaded Knoppix version 3.8 (CeBit) and the latest Knoppix 3.8.1;
When I try to boot up, the system locks up at the black screen, before loading XWindow, in fact it says something like:
"After this the system will be rebooted", but then carries on until nothing happen and I get the simple black screen with the shell, no graphics at all...
The only way I can reboot is just type in: reboot;
How come? Any of you has some idea about this problem?
This just happen, on my laptop, because I have tried the cd on my home pc, and University pc, and it works just fine...
I done a MD5 checksum and gives me a correct answer!
Thanks in advance.
Urb85
did you get it working. have same problem with aspire 1414 wlmi.
black screen, no kde.
Same here, Acer Aspire 1400LC P4 with Radeon Mobility M6 (which has a bug in 3D acc). You can use Alt-Backspace to get out of the Xserver, use "init 2" to go to text mode and have a look at /var/log/XFree somthing.log
I get some warnings at the end of the log. Changed some settings in XFreeConfig-4 and even used the default Config, but to no avail.
Older version (V.forgot)of Knoppix work fine, apart from wireless drivers.help...
Vielleicht kann ich euch helfen!
Ich habe auch einen neuen Acer, und zwar TravelMate 4150 mit Intel 915 GM mit 3D Intel Graphics Media Accelerator 900.
Der Bildschirm beim starten von X wurde auch schwarz.
Mit Knoppix 4.0 DVD versuchte ich es schließlich mit folgendem Bootparameter:
knoppix vga=normal
=> erfolgreich
Bei der Ubuntu Live Version 4.10 hatte ich Erfolg mit dem Booteintrag:
expert
Wärend des Bootvorganges wird die Grafikkarte autodetected:
using XFree86(vesa)Server
Using Modes "1024x768"
Bei der Installation auf Festplatte bin ich momentan dabei. Da könnt Ihr mir ja die Daumen drücken, daß dann auch der Grafikbildschirm läuft. Aber ich habe schon gelesen, daß man in der "menu.lst" von grub dem Kernel auch "vga=normal" hinzufügen muß.
Viel Glück
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M5 V07 Blade Server chassis with (2x) Heatsinks
$299.99
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 768GB RAM No HDD
$1000.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99