What does /etc/fstab show?
Ive run knoppix 3.8 knx2hd.
Booted up , I cant mount usb stick , athough usbview shows device. - Cardreader 7-1
I cant modprobe sd_mod , cause there is non.
mount /dev/sdc1 /mnt does not work ... sda and sdb are hds .
What can I do to mount the USB Stick ? Please help.
some data : ---------------------
dmesg shows
Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi3, channel 0, id 0, lun 0, type 0
usb 5-4: USB disconnect, address 6
usb 5-4: new high speed USB device using ehci_hcd and address 7
uba: device 7 capacity nsec 0 bsize 512
lsmod |grep usb*
usb_storage 63296 0
usbhid 42176 0
usbcore 101496 7 usb_storage,ehci_hcd,ub,usbhid,ohci_hcd,uhci_hcd
lsmod |grep *scsi* -> nothing there
What does /etc/fstab show?
There is no fstab entry for the usb stick ...
So long I tried manually to mount the usb dev, but so long it doesnt work ....
-------
>mount /dev/uba1 /mnt
mount: Kein Medium gefunden
>mount /dev/sdc1 /mnt
mount: /dev/sdc1 ist kein gültiges blockorientiertes Gerät
--------
# /etc/fstab: filesystem table.
#
# filesystem mountpoint type options dump pass
/dev/sdb2 / ext3 defaults,errors=remount-ro 0 1
proc /proc proc defaults 0 0
/dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0
usbdevfs /proc/bus/usb usbdevfs defaults 0 0
sysfs /sys sysfs defaults 0 0
/dev/cdrom /cdrom iso9660 defaults,ro,user,noexec,noauto 0 0
/dev/dvd /dvd iso9660 defaults,ro,user,noexec,noauto 0 0
/dev/cdaudio /cdaudio iso9660 defaults,ro,user,noexec,noauto 0 0
# Added by KNOPPIX
/dev/sda1 /mnt/sda1 reiserfs noauto,users,exec 0 0
# Added by KNOPPIX
/dev/sda2 none swap defaults 0 0
# Added by KNOPPIX
/dev/sda3 /mnt/sda3 reiserfs noauto,users,exec 0 0
# Added by KNOPPIX
/dev/sda5 /mnt/sda5 reiserfs noauto,users,exec 0 0
# Added by KNOPPIX
/dev/sda6 /mnt/sda6 reiserfs noauto,users,exec 0 0
# Added by KNOPPIX
/dev/sdb1 none swap defaults 0 0
USB stick is mountable mount /dev/uba1 /mnt
But my cardreader ist noch. All listed files above were while testing with the cardreader.
It is an 5:1 USB 2.0 Cardreader.
Can anybody help - with that ?
Some(?) most(?) multicard readers don't seem to work in Linux.Originally Posted by palutke
i have a cheap power cardreader, yes that is is the "brandname" in raised letters on the top of the unit.
it works well in linux. i even get a new device for each card it has in it.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$294.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99