-
Copy files to my hard drive
Hello,
I don't have a problem so to speak, but I am trying to do something. I bought an IBM ThinkPad, used, recently and it has a hidden partition with the recovery program on it. What I would like to do is use Knoppix to copy the contents of the hidden partition, which Knoppix sees just fine, to my C:\ drive then hopefully I can create a restore CD in case my hard drive goes to hard drive heaven someday. I have tried to do this with Knoppix but it keeps saying it cannot create a folder or can't copy files an so on. I appreciate any help or advice.
Thanks All,
Larry
-
all hdds are set up in read-only mode under the live-CD
open the properties tab of your hdd (from the desktop) and there is a permissions tab that shows the drive is in read-only mode.
uncheck it, and be careful afterwards
-
Thanks, I found this out with a little exploring and it worked wonderful, but it didn't really do me anygood. I was wanting to creat a system restore cd. I copied all the files from the hidden restore partition to a folder on my c:\ drive and then burnt the contents to a CD-R but there is nothing there for it to recognize at boot-up. I assume all the files are there but I don't know how to use them. I will work on this unless you have a suggestion? Thanks again.
the hidden partition is used by a setting in the bios.
in compaq's, when the boot cursor flashes on the rhs instead of the left, you hit a magic button and it goes into setup mode.
the IBM would do the same thing but it's just the going into bios thing.
instead of having a bios program in the bios chip (like most computers) they use the hidden partition to store programs and utilities which work with the bios in a bios'y fashion.
so the files need to go back onto a partition of the same type, and also, possibly, in the same position if it's a boot block address type of access, so that the
hit 'del' to get into bios
has somewhere to actually go.
it's the type of partition, the hiddenness of it, and possibly position , that make it get used by the bios program.
having it in a folder on your main drive, i don't think would do much, but they might be runnable in dos mode.
Similar Threads
-
By Peter42y in forum General Support
Replies: 2
Last Post: 12-11-2007, 12:28 AM
-
By Maninafix in forum MS Windows & New to Linux
Replies: 1
Last Post: 01-13-2007, 02:36 AM
-
By Kehart25 in forum MS Windows & New to Linux
Replies: 2
Last Post: 12-03-2006, 06:19 PM
-
By PaulKraemer in forum General Support
Replies: 1
Last Post: 05-08-2006, 04:49 PM
-
By omega in forum General Support
Replies: 0
Last Post: 01-30-2005, 07:46 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00