-
monitor displays nothing when starting knoppix
i've just recently downloaded knoppix, and i burned it onto a cd, hoping i would be able to use it by today. i stick the disk into my drive, wait for my computer to boot up, get the the little "do you want to use knoppix" screen, pressed enter, and......nothing.
when i pressed enter, a little message that said "Out of Range popped up onto my monitor. how can i fix this so that i can view Knoppix?
my monitor is a Microtek 710S
My video card is an SIS 650 (i belieive; its something like that)
i'm using Knoppix 3.9
if there is anymore information i should provide, please ask.
-
Senior Member
registered user
It sounds like knoppix is doing the best it can at autodetecting the video hardware (perhaps getting it wrong) & then setting a resolution & refresh rate that is beyond the capabilities of the hardware. Try booting knoppix with some Cheat Codes, such as:
knoppix screen=800x600 xvrefresh=60
knoppix screen=640x480 xvrefresh=60
I hope this helps.
James
-
thanks for your help, but unfortunately this didnt resolve the problem
the same message is popping up on my monitor.....any other ideas as to what to do?
-
I have the same problem when booting up, the screen resolution & refresh rate is different so during start up the screen become distorted.
I am new to Knoppix, can anyone teach me where to find boot prompt to configure it and save the configuration to the harddisk so the next boot up can start to that setting.
-
should i mention that when the message "Out of Range", its a monitor message, coming from the monitor. Knoppix is not delivering the message.
agh i'm so confused.
-
-
It must be SYNC OUT OF RANGE not Out of range ... I think ur using a very old monitor.
-
Senior Member
registered user
Originally Posted by
indiandude514
should i mention that when the message "Out of Range", its a monitor message, coming from the monitor.
Have a look at the cheatcodes, especially the Tips & Tricks.
If you are unable to book Knoppix, try one or both of these two boot commands:
boot: knoppix vga=0 debug -b 3
...
boot: failsafe debug -b 3
Are you able to get to the final stage? If not, what is the last stage you are able to get to?
Regards,
- Robert
http://www.cwelug.org/
Similar Threads
-
By daviddoria in forum Hardware & Booting
Replies: 7
Last Post: 05-15-2010, 11:42 PM
-
By robwelch100 in forum General Support
Replies: 0
Last Post: 04-02-2005, 02:48 AM
-
By kenelder in forum General Support
Replies: 8
Last Post: 07-12-2004, 06:42 PM
-
By Zer0th in forum General Support
Replies: 0
Last Post: 04-02-2004, 05:01 AM
-
By tommydl in forum Ideas
Replies: 0
Last Post: 03-29-2004, 08:30 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
AMD EPYC 7282 CPU Processor 16 Cores 32 Threads 2.8GHZ up to 3.2GHZ 120W no lock
$74.00
Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...
$419.99
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$619.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Core i5-13500 65w 14 core Raptor Lake Processor
$162.00
AMD Ryzen 5 4500 6-Core 3.6GHz Socket AM4 65W CPU Desktop Processor
$79.00
Intel Core i9-13900KF Unlocked Desktop Processor - 24 Cores (8P+16E) & 32 Thread
$539.99
AMD Ryzen 5 5600X Desktop Processor (4.6GHz, 6 Cores, Socket AM4)
$119.00
AMD Ryzen 5 5600 Processor (3.5 GHz, 6 Cores, Socket AM4) - 100-100000927BOX
$100.00
AMD Ryzen 5 4500 Processor (3.6 GHz, 6 Cores, Socket AM4) - 100-100000644BOX
$69.99