Iam making this from knoppix(my hdinstall)
I used wvdial and edited the wvdial.conf .
Now Iam connected to the internet.
Extra details: I have a fone which has a inbuilt modem (modem type=std 33600bps modem)
No linux drivers given by those guys, and they say only windows is supported. But I know Knoppix
is capable of connecting with the same fone.
I have config'ed tata fone (walky) for internet, and while dialing
I get this message in the log file for debug window.
Tell me where I have gone wrong.Code:======================================== O NO CARRIER K ATM1L1 OK ATX3 OK ATDT*777# ========================================
I get to see NO CARRIER at the dialing utility before this stage it was initializing modem
The above was config'ed in kppp. I did not try wvdial yet.
Iam waiting for more suggestions before trying it.
Iam making this from knoppix(my hdinstall)
I used wvdial and edited the wvdial.conf .
Now Iam connected to the internet.
Phone with modem? And how is it connect to the PC? With serial cable?
Yeah , com1. Serial port.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Kingston KCP424SD8/16 16GB DDR4 2400Mhz Memory RAM
$15.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98