Results 1 to 5 of 5

Thread: Can't navigate file folders

  1. #1
    Member registered user
    Join Date
    Jun 2005
    Location
    England
    Posts
    42

    Can't navigate file folders

    Can anyone point me to the solution...?

    One minute it worked perfectly - I could click on the hda1 or hbd1 or CDROM or Floppy icon on the desktop, and the relevant folder would open. I could copy and paste, move files around, and do all the file management things I want.

    The next minute, clicking on a file folder on the desktop brings up the message "Sorry - Kdesktop. KDEInit could not launch'/mnt/hda1' " (or whichever drive I click on).

    I tried various actions, none of which fixed it. Rebooting did not bring back the file folder function either. I can get to the folder contents and navigate normally by using File Manager in SuperUser mode, but shouldn't need to do that.

    I've searched the forums and Google but found no answer.

    What do I do to get the file folders back?

    It's Knoppix 3.8.2 installed on the hard drive of an old Pentium 600MHz machine with 512MB of RAM and three hard drives, one CDROM drive, and one floppy drive.

  2. #2
    Senior Member registered user
    Join Date
    May 2003
    Location
    Belgrade, YU
    Posts
    334
    This is known issue. Unfortunatelly, I forget the solution. I restart Konqueror and it works again, or wait a bit. There is something here http://66.102.9.104/search?q=cache:e...t+launch&hl=en
    "dont launch it from kwrite as root, instead use kdesu kwrite as a regular user"

  3. #3
    Member registered user
    Join Date
    Jun 2005
    Location
    England
    Posts
    42
    Thanks for that. I've made the change to menu-xdg as suggested there anyway - I was having the same problem with some changes not being kept after a reboot.

    But I've had the " KDEInit could not launch'/mnt/hda1' " problem for ten days or so, and nothing changes despite many restarts. What I do notice is:

    - Konqueror in su mode can flip up and down the folder tree with no problems;
    - If I set konqueror to open each folder in a new window, it works fine when I click on folders. But if I leave it set to use the same window, I get this problem.

    It's as if konqueror not in su mode didn't have sufficient permissions for something. The main annoyance is that I have all the main folders on the desktop, but can't open them by clicking. I've cheated, and can get there by another way, but it isn't right.

  4. #4
    Member registered user
    Join Date
    Jun 2005
    Location
    England
    Posts
    42
    Lots of frustrating further investigation later, and after a reboot, I tried to open a drive that wasn't "mounted" and got a different error message - "mount - only root can do that". It seems like permissions are screwed up somewhere. I wonder what piece of software needs root permission to mount a hard drive so that I can view the contents. Or has a file somewhere with access rights been corrupted?

  5. #5
    Member registered user
    Join Date
    Jun 2005
    Location
    England
    Posts
    42
    AT LAST! Problem solved. At some point, a file somewhere had got corrupted and Knoppix was trying to use Rosegarden as its file manager for anything clicked from the desktop.

    Control Panel - KDE Components - File Associations - inode - directory and remove Rosegarden, add Konqueror, and all is well. Phew!

    It took a while to find, because "inode" is not a term I know.

Similar Threads

  1. I can't see folders with a non-english font
    By Obscu in forum General Support
    Replies: 3
    Last Post: 11-16-2008, 12:25 PM
  2. Desktop File Folders don't work
    By Keithj in forum Hdd Install / Debian / Apt
    Replies: 10
    Last Post: 09-10-2005, 05:55 AM
  3. public_html folders
    By Leipe_Po in forum General Support
    Replies: 0
    Last Post: 05-10-2005, 01:34 AM
  4. k3b cannot see files, so I can't navigate to them.
    By sunlion in forum General Support
    Replies: 2
    Last Post: 04-28-2005, 06:36 PM
  5. Opening folders and files
    By rrfish72 in forum General Support
    Replies: 0
    Last Post: 09-03-2004, 01:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00



HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES

$199.99



HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD picture

HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD

$249.99



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon

$846.19



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ* picture

HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*

$94.99



Supermicro 5018A-FTN4 Rack Server - Black picture

Supermicro 5018A-FTN4 Rack Server - Black

$125.00



Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001 picture

Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001

$149.99



SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD picture

SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD

$90.00



1U 20

1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME

$247.00