while looking around here it seems that it are X11 settings.
how can I change those settings in X11?
i'm really new to this.
and I would like to learn Linux
first of all i would like to thank all the people involved with Knoppix.
i got it running without problems.
i never got suse, rethat or any other working before.
but now i would like to know how i can boot it with automatic values.
i always need to type 'knoppix screen=1024x768 depth=24 wheelmouse'
but before i'm done with typing all that i'm a min later. (not a fast typer)
so where can i put those values to boot like that automaticly?
Thanks
while looking around here it seems that it are X11 settings.
how can I change those settings in X11?
i'm really new to this.
and I would like to learn Linux
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
to: Allowee
re: hdd install
OK, after booting with all your special settings on (from boot: screen with knopppix commands) click the K in the bottom left corner of the desktop.
Make sure you have a linux formatted disk in the floppy drive (boot disk is ok).
Then click KNOPPIX and then clickk Save KNOPPIX Config.
This creates a knoppix.sh bash file and saves it on the floppy saving your desired settings.
To boot up again with those settings without having to type them every time on the boot: screen, make sure that same disk is in the floppy drive and just type at the boot: knoppix floppyconfig.
That should do it!
Good Luck,
sorry, knoppix.net kept saying send error!
Did it say "failed to send email?" It's been happening to me too. I haven't been getting reply notifications either- something's fishy around here.Originally Posted by A. Jorge Garcia
Allowee-
Did you install Knoppix to your hard drive or are you booting from cd?
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$5.09
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56