What NIC? What modem? What drivers?Originally Posted by samsonleung
Hello, Knoppix works well on my compaq presario 1700 (17XL57.
However, it fails to detect the Network Interface Card and Modem.
Is it possible to install driver for it?
Also I cannot use it in my other Linux.
Thanks so much.
What NIC? What modem? What drivers?Originally Posted by samsonleung
Hello, sorry for the late reply.
The NIC card is Conexant Combo 10/100 NIC and the modem is Conexant HSF Modem. Is it possible to use the NIC and modem in Knoppix or other Linux?
I beleive that NIC uses the tulip driver. It's included w/ Knoppix. Try netcardconfig. If that doesn't work perhaps sudo modprobe tulip will do it. The modem (commonly referred to as a 'winmodem')will be a little more work. You'll need to install drivers for it. Here's a post about installing the drivers while booted from cdrom. Alternatively you could install Knoppix to hdd and install the drivers there or buy an external hardware modem which should work quite well with Linux. The software modems rely very heavily on the OS to do most of the work.
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R630 8SFF 2.6Ghz 20-Core 128GB Mem 2x10G+2x1G NIC 2x750W PSU
$399.04
Dell Poweredge R640 Server | 2x Gold 6132 | 512GB | H730P | 4x 1.2TB 10KRPM HDD
$2729.00
Intel Xeon E5-2697A v4 2.6GHz 40MB 16-Core 145W LGA2011-3 SR2K1
$37.00
INTEL Xeon E5-2697 V4 SR2JV 2.30GHZ 18-Core CPU 2697v4 GRADE A CONDITION @ A
$49.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 A Grade Processor
$4.79
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
HP Z440 WORKSTATION XEON E5-1603V3 @ 2.80GHz, 16GB RAM 250 GB SSD Win 11
$119.99
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$99.00