Thanks to Christian Perle
----------------------------------------------------------------------------------------------------------
On Thu, Apr 17, 2003 at 22:40:29 +0800, Hansom Young wrote:
> I'm wondering which files are modified/deleted by knx-hdinstall
during
> the installation? I read that script but was messed up. Perhaps
someone
> out there could tell me about this?
(each destination path is prepended by /mnt/target during install
time)
The runlevel directories /etc/rc[023456S].d are emptied and filled
with
symlinks from the templates tarball
(/usr/local/lib/knx-templates-*.tgz)
Some symlinks in /etc/rc5.d are deleted, depending on the user's
choice
which services to run at boot time.
/etc/init.d/keymap.sh is replaced with one of the keymap.sh-$LANG
files
from the templates, depending on $LANG setting.
Device symlinks for /dev/mouse and /dev/cdrom are created.
/etc/profile and /etc/inittab are replaced by files from the template
to remove login-less root shells (security).
/etc/motd is changed to reflect the actual kernel version.
/etc/modules is contructed from the currently loaded modules (the ones
loaded by Knoppix hardware detection).
/etc/inputrc is replaced by a file from the template to allow 8-bit
chars input.
/etc/fstab is created, depending on the chosen root/swap partitions
and
the other partitions found by Knoppix.
/etc/init.d/bootmisc.sh is modified for turning on DMA for hard disks.
XF86Config[-4] (generated by Knoppix) is copied to /etc/X11.
/etc/X11/Xsession.d/45xsession is disabled (moved to /root).
/etc/X11/xdm/xdm-config is changed to fix a problem with X server
authorization in xdm.
/etc/kde[23]/kdm/kdmrc is changed to fix a problem with X server
authorization in kdm.
/etc/hosts, /etc/hostname, /etc/mailname are changed to the
user-specified host name.
/etc/network/interfaces, /etc/resolv.conf are changed (by
netcardconfig)
if at least one ethernet interface was found.
/etc/inetd.conf is replaced by a file from the templates (all services
disabled by default) (security).
/etc/sudoers is changed to remove unrestricted root access for user
knoppix (security).
Knoppix menu entries depending on the former sudo config are removed.
Knoppix-generated i18n is copied to /etc/sysconfig.
/etc/alternatives/soffice.* is replaced by the actual languange config
(dunno exactly, Klaus included this).
/etc/hosts.allow is changed to be less restrictive (from templates).
/tmp is created as a "normal" directory (not a symlink to
/var/tmp).
/etc/mtab is created as a regular file (not a symlink to
/proc/mounts).
/etc/skel/.kde/share/config/kpersonalizerrc is changed so that kde
first time config is active when a user starts kde for the first time.
/home/knoppix is created and /etc/skel contents are copied into.
Passwords are set for users root and knoppix, /etc/shadow is modified.
An initrd.gz is created if certain kernel modules are needed at boot
time (before mounting the root filesystem). If installing to a SCSI
hard disk and/or using ext3, reiserfs, xfs as root filesystem,
initrd.gz is created.
/etc/lilo.conf is created by genliloconf.
Boot floppy creation does not change any files on hard disk.
bye,
Chris
--
Christian Perle perle@itm.tu-clausthal.de
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Dell R630 8SFF 2.4Ghz 12-Core 128GB H330 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$430.04
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00
Yottamaster 4Bay RAID RGB Hard Drive Enclosure Type B Fr 2.5'' 3.5" SATA HDD SSD
$149.99