Results 1 to 2 of 2

Thread: 250MB ZIP issue and Radeon 9600 series (v350)

  1. #1
    Junior Member
    Join Date
    Sep 2005
    Posts
    4

    250MB ZIP issue and Radeon 9600 series (v350)

    Hello I'm running LIVE CD 4.0 Knoppix...
    I have an internal IOMEGA ATAPI 250MB ZIP that's connected to a PCI mass storage controller Promise Technology, Inc. When I boot up I type in "knoppix dma" because all the cd/dvd rom supports it...then comes along my hardware devices and it shows the 250 ZIP as "hdf". So obviously it detected the hardware, because it also shows up under"Knoppix -->Utilities-->Hard Disk/CD/DVD DMA Acelleration. I tried putting in a ZIP disk and it doesn't detect like if I did with a floppy. What's weird is My Lite-On DVD-ROM LTD163 is also connected to the Promise PCI card and it detects and also puts it on my desktop and I can access it just fine. I tried in root console to mount it and it couldn't find the mount point. I tried to make a link to device and use the device pulldown and couldn't find hdf.. i even tried to manually enter it in and nothing happens..I remmy I did it on kanotix somehow I got it to read the zip but only through root I could do that...With the ATI Radeon 9600 series i know right now its 2d mode and hopefully 3d support will come soon?! crossing fingers I notice going in GNOME Center: Desktop Preference in Screen settings I got the highest default setting 1024x768 76Hz, now when I change it to 800x600 it goes wild and the whole screen is twisted. Is there a fix for that and as well for my ZIP drive?? I would appreciate any feedback or information. Thinking if knoppix can slove these two for me, I'm definetly going to be grateful!!!!

  2. #2
    Junior Member
    Join Date
    Sep 2005
    Posts
    4

    here is my hardware list from using lspci -v

    0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
    Subsystem: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface
    Flags: bus master, fast devsel, latency 0
    Memory at f8000000 (32-bit, prefetchable) [size=64M]
    Capabilities: <available only to root>

    0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, fast devsel, latency 32
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: ff400000-ff4fffff
    Prefetchable memory behind bridge: d6900000-f69fffff

    0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Intel Corp.: Unknown device 5247
    Flags: bus master, medium devsel, latency 0, IRQ 16
    I/O ports at e800 [size=32]

    0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Intel Corp.: Unknown device 5247
    Flags: bus master, medium devsel, latency 0, IRQ 19
    I/O ports at e880 [size=32]

    0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Intel Corp.: Unknown device 5247
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at ec00 [size=32]

    0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01) (prog-if 20 [EHCI])
    Subsystem: Intel Corp.: Unknown device 5247
    Flags: bus master, medium devsel, latency 0, IRQ 9
    Memory at ffaffc00 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <available only to root>

    0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: ff500000-ff9fffff
    Prefetchable memory behind bridge: f6a00000-f6afffff

    0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 01)
    Flags: bus master, medium devsel, latency 0

    0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
    Subsystem: Intel Corp.: Unknown device 5247
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at <unassigned>
    I/O ports at ffa0 [size=16]
    Memory at 30000000 (32-bit, non-prefetchable) [size=1K]

    0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
    Subsystem: Intel Corp.: Unknown device 5247
    Flags: medium devsel, IRQ 10
    I/O ports at e000 [size=32]

    0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
    Subsystem: Intel Corp.: Unknown device 0102
    Flags: bus master, medium devsel, latency 0, IRQ 17
    I/O ports at e400 [size=256]
    I/O ports at e080 [size=64]
    Memory at ffaff800 (32-bit, non-prefetchable) [size=512]
    Memory at ffaff400 (32-bit, non-prefetchable) [size=256]
    Capabilities: <available only to root>

    0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600] (prog-if 00 [VGA])
    Subsystem: ATI Technologies Inc: Unknown device 0002
    Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
    Memory at e8000000 (32-bit, prefetchable) [size=128M]
    I/O ports at c800 [size=256]
    Memory at ff4f0000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at ff4c0000 [disabled] [size=128K]
    Capabilities: <available only to root>

    0000:01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)
    Subsystem: ATI Technologies Inc: Unknown device 0003
    Flags: bus master, 66MHz, medium devsel, latency 32
    Memory at e0000000 (32-bit, prefetchable) [size=128M]
    Memory at ff4e0000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: <available only to root>

    0000:02:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
    Subsystem: Creative Labs SB0090 Audigy Player
    Flags: bus master, medium devsel, latency 32, IRQ 22
    I/O ports at d000 [size=32]
    Capabilities: <available only to root>

    0000:02:01.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
    Subsystem: Creative Labs SB Audigy MIDI/Game Port
    Flags: bus master, medium devsel, latency 32
    I/O ports at dc00 [size=8]
    Capabilities: <available only to root>

    0000:02:01.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
    Subsystem: Creative Labs SB Audigy FireWire Port
    Flags: bus master, medium devsel, latency 32, IRQ 21
    Memory at ff9cf800 (32-bit, non-prefetchable) [size=2K]
    Memory at ff9c8000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: <available only to root>

    0000:02:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05)
    Subsystem: Compaq Computer Corporation NC3120 Fast Ethernet NIC
    Flags: bus master, medium devsel, latency 32, IRQ 18
    Memory at f6aff000 (32-bit, prefetchable) [size=4K]
    I/O ports at df00 [size=32]
    Memory at ff800000 (32-bit, non-prefetchable) [size=1M]
    Expansion ROM at ff700000 [disabled] [size=1M]
    Capabilities: <available only to root>

    0000:02:04.0 Unknown mass storage controller: Promise Technology, Inc. PDC20267 (FastTrak100/Ultra100) (rev 02)
    Subsystem: Promise Technology, Inc. Ultra100
    Flags: bus master, medium devsel, latency 32, IRQ 17
    I/O ports at d880 [size=8]
    I/O ports at d800 [size=4]
    I/O ports at d480 [size=8]
    I/O ports at d400 [size=4]
    I/O ports at d080 [size=64]
    Memory at ff9e0000 (32-bit, non-prefetchable) [size=128K]
    Expansion ROM at ff9d0000 [disabled] [size=64K]
    Capabilities: <available only to root>

Similar Threads

  1. Problems with Radeon 9600 Mobility
    By ilcheffe in forum Hardware & Booting
    Replies: 1
    Last Post: 11-14-2005, 09:20 PM
  2. Radeon 9600 Problems
    By iD:0t in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 03-15-2005, 01:23 PM
  3. Replies: 3
    Last Post: 06-19-2004, 05:45 PM
  4. ati molility radeon 9600 only in 800x600 mode
    By mimamo in forum Hardware & Booting
    Replies: 0
    Last Post: 03-14-2004, 10:26 PM
  5. Support for the ATI 9600 Series
    By Uwe Brauer in forum General Support
    Replies: 0
    Last Post: 01-01-2004, 11:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper EX2200-C-12T-2G 12 Port L3 EX2200-C Compact Fanless Switch 1YearWarranty picture

Juniper EX2200-C-12T-2G 12 Port L3 EX2200-C Compact Fanless Switch 1YearWarranty

$195.00



Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty picture

Juniper EX4300-24T Layer 3 24 Ports Manageable Ethernet Switch 1 Year Warranty

$195.00



JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER picture

JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER

$210.00



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$40.18



Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch picture

Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch

$89.00



Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P picture

Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P

$299.99



Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord picture

Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord

$53.99



Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch picture

Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch

$130.00



Juniper QFX5100-48T-AFO   48 100M/1G/10G Base-T 6 QSFP AFO picture

Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO

$485.00



Juniper EX2300-48P  PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested picture

Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested

$289.00