I do not know of a way to install Windows 95/98 without losing lilo. It will overwrite the MBR and you will lose lilo. You can however use knoppix to restore lilo to the MBR.I just do not want to overwright lilo
Can you install windows 95 after you have installed knoppix I just do not want to overwright lilo
I do not know of a way to install Windows 95/98 without losing lilo. It will overwrite the MBR and you will lose lilo. You can however use knoppix to restore lilo to the MBR.I just do not want to overwright lilo
The rule of thumb is install Windows, then Linux. You can do it the other way around, but it's a lot more work.Originally Posted by morbidpalooza
Regards,
- Robert
http://www.cwelug.org
Originally Posted by UnderScore
how do I do that i lost lilo lolol
for a quick recovery.
boot knoppix from Cd.
open a console and issue these comands.
#mount the / poartition of Linux read write (let us call it /dev/hda1 and ext3 filesystem)
#now to chroot into your /Code:mount -t ext3 /dev/hda1 /mnt/hda1
#erything is now done to your hdCode:chroot /mnt/hda1
#edit or make sure /etc/fstab is corect as to what filesystem is where and how many partitions you have...
#fdisk -l lists partitions and filesystemsCode:fdisk -l
#cat /etc/fstab outputs fstab to screen. the two above sould match 100% as to what filesystem is where, number of partitions... otherwise edit (mcedit /etc/fstab, save with F2 and exit with F10)Code:cat /etc/fstab
#check that windows is entered in /etc/lilo.conf, and on corect partitition...
#if not edit (mcedit /etc/lilo.conf, save with F2 and exit with F10)Code:cat /etc/lilo.conf
#now it is time to mount everything with your linux fstab.
#now we can restore lilo to mbr.Code:mount -a
#if everything went well we can nowCode:/sbin/lilo
#sync the disks (everything written to disk)
#unmount
#clear the screen
#disengage / form /mnt/hda.
this is as much step by step i can manage without more to go onCode:sync&&umount -a&&clear&&exit
Thank you worked great!
you are welcome to what little I could help you with.
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00