I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
I'm newbie for Linux and Dial Up user..
I've tried to configure my internal 56K modem (ActionTec V.90 PCI Modem) via the modem-assistant. I know my modem not winmodem, it's hardware modem And It use COM PORT=3, IRQ=9 on WinXP)
However it can't find with S2.. I get an answer from the modem on S1 but empty ATI Values.
Anyway, if I dial, the modem stops on "initializing modem".
What's the Problem?
And what can i do?
Thanks in advance..
I have the same problem
It says Initializing Modem but nothing happens
I have Connexant soft 56 K Internal modem
FarAway- as root do this:
setserial /dev/ttyS3 irq 9
ln /dev/ttyS3 /dev/modem
Then configure kppp
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Samsung 256GB (16GBx16) 2Rx4 PC3L-10600R DDR3 ECC RDIMM Server Memory #99
$124.99
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Kingston KCP424SD8/16 16GB DDR4 2400Mhz Memory RAM
$15.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98