Just found the problem.
Using the failsafe option boots Knoppix with both Serial ATA drives enabled.
Hello,
I can't boot Knoppix 4.0.2 or 4.0.0 (both DVD-Version). The DVDs should be alright, because they can boot on other systems. Knoppix 3.8, Kanotix and many other Linux-Live CDs or DVDs can boot without any problems.
Does anybody know, if there is a trick to boot or is there an error with the boot loader of Knoppix 4.0.x. The systems hangs when trying to identify the Serial ATA harddrives. When I disconnect the Serial ATA drives the boot-process suceeds and I can log in into Knoppix.
Any hints?
Just found the problem.
Using the failsafe option boots Knoppix with both Serial ATA drives enabled.
i found this problem on my celeron1000. do not know why but version 3.6 and higher, also the STD version do not want to boot here.
Have you tried it with the failsafe option? With that option enabled it worked for me.
Looks like a bug in the auto detection of Knoppix 4.0.x. I have tried many other distributions and no other showed this problem.
yes with failsafe it boots ok, but i think it is not just the 4.0 version , in my case it was also with 3.6 , 3.7 and 3.9
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$55.45
Dell 7H4CN PERC H730P Raid Controller Mini Mono12GBPS 2GB NV Cache
$44.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
DELL PERC H310 RAID Controller with Cables, OHV52W, 6Gb/s SAS SATA PCIe x8
$19.95
Adaptec ASR-78165 SAS/SATA RAID Controller Card 6Gb/s
$29.99
Adaptec - ASR-7805 6Gbs SAS- PCI EXPRESS 3.0 X8 -1GB Cache RAID Controller Card
$33.28
Inspur LSI SAS3008 12Gbps SAS HBA RAID Controller Card P/N:YZCA-00424-101 Tested
$24.99