on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
I just started using Knoppix, and I'm having a bit of a problem getting my wireless network connection up. I didn't have a problem with RedHat, so it's probably just a lack of knowledge on my part
Anyway, two connections are detected (lan and wlan card, presumably eth0 and eth1)... By default wlanconfig tries to configure eth0 and it fails. I went to console and ran it with eth1, following the prompts. But either way i get an error saying that it can't assign the ESSID when i choose the network SSID or leave it blank (with either eth0 or eth1). The network config doesn't work either... DHCP broadcast always fails. Any ideas how to set up my wlan card?
on my machine it is just :
iwconfig eth0(eth1) essid "your essid" enc "sxxxx"
where xxxxx is the 5 character WEP, you can skip the enc part if you don't use WEP.
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$99.99
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
$16000.00
IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs
$49.74
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server
$191.99
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$26.97
IBM System x3550 M4 Server 2 x Intel Xeon E5-2609 36GB RAM No HDDs
$68.84
IBM Power S822 8284-22A 2.5" 12-Bay 64GB 2X 00ND478 2X 00E2865 *READ*
$599.99
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00