All I had to do was run the previous procedure and the plug the card in.....
I had a problem with every driver except this one so here you guys go.... hope it helps...
First you need the HP driver SP23107A, Extract the files, I used my handy USB Memory Card...
Boot Knoppix
Go to the Konsole
type:
su
Install the driver:
ndiswrapper -i bcmw15.inf
check by running:
ndiswrapper -l
It should say driver and hardware present
then type:
ndiswrapper -m
Now type:
modprobe ndiswrapper
Now check with:
dmesg
If both ndiswrapper and the driver loaded your good to go, now hit the wireless activation button and the light should come on. You can now use the config scripts in the KNOPPIX menu the do the rest.
I haven't tested this with other 4306 chips, I've got a Linksys WPC54G ver. 1.2 and it also is a 4306 Chip... Stay Tuned...
All I had to do was run the previous procedure and the plug the card in.....
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS
$299.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00