--You probably left out the "hdc=ide-scsi" kernel parms when booting the linux kernel...
Originally Posted by Ewen
After a great deal of experimenting with .bat files and what have you I can now boot from a floppy disk straight to Knoppix mounted on the C:\ drive in a Knoppix folder and it will load my previously saved config files quite happily.
There is only one problem... my burner is no longer recognised and whats more i can't configure it.
When I was booting from the CD (reading previously saved configs) it correctly identified both my CDRom and the CDburner and it all worked very well. I have changed the root password to one of my own. However when the setup screen appears both drives are shown as readers
Can someone provide some suggestions please?
--You probably left out the "hdc=ide-scsi" kernel parms when booting the linux kernel...
Originally Posted by Ewen
ARUBA J9772A 2530-48G PoE+ 48 PORT ETHERNET SWITCH W/ RACK EARS J9772-60301
$140.23
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
HPE ARUBA 2530-24G J9773A PoE+ 24-PORT GIGABIT ETHERNET SWITCH J9773-60201
$98.15
TRENDnet TEG-S17D 16-Port Gigabit Unmanaged Network Switch
$50.00
NETGEAR GS305300PAS 5 Port Gigabit Ethernet Unmanaged Switch
$15.99
NETGEAR GS305Pv2 5-Port Gigabit Ethernet Unmanaged SOHO Switch W/PoE+
$19.99
NETGEAR 8-Port Gigabit Ethernet Unmanaged Switch GS308 300 Switch series
$27.27
TP-Link TL-SG108PE 8-port Gigabit Easy Smart PoE+ Swith w/ 4-port PoE - Sealed
$49.50
Cisco SG300-52-Port Gigabit Managed Rack Mountable Network Switch
$44.95
Brocade ICX 7250-48 48-Port Gigabit Ethernet Network Switch | ICX7250-48-2X10G
$84.95