i think there's a disabel dialtone checking somewhere. It's been over a year since I used KPPP, 6 months since I used a PPP gui, and 6 weeks since I had dialup.
Hi:
I am trying to setup a dial-up connection for a friend with D-Link Dialup Serial External Modem, I get no Dial tone message with KPPP, and pppconfig does start a connection with pon.
Message on KPPP is
ATZ
OK
M1L1
OK
ATDT phone-number
NO DIAL TONE
How do I get this working on Knoppix?
Thanks Much
AJ
i think there's a disabel dialtone checking somewhere. It's been over a year since I used KPPP, 6 months since I used a PPP gui, and 6 weeks since I had dialup.
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.69
HGST 3.5 Internal Hard Drive 3TB 7200rpm 0F12470
$30.00
*LOT OF 40* 500GB Desktop PC 3.5" SATA Hard Drive HDD*Tested*
$212.00
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.52
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$69.99
Seagate Exos X14 12TB SATA6Gb/s 7200RPM 3.5" Enterprise Hard Drive ST12000NM0558
$99.95
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$19.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$44.62
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99