check your HD or ram something could be intermittent there which make it hard to trace
I installed Knoppix 4.02 on and very old Gateway Solo 2500 Laptop. It has a 6 gb hdd, and 64mb of ram, but knoppix ran just fine. During the installation it took about 2 hours to get fo 0% to 77% and 15 hours to get from 77% to 100%. Now after GRUB loads I get this message
"Kernel panic - not syncing: VFS: Unable to mount root sf on unknown-block(3,1)"
Any help would be great. Thank you.
check your HD or ram something could be intermittent there which make it hard to trace
Its not the RAM or the HD. Its the knoppix installed to a HD process which seems to have a 60 percent success rate. Search the forums & see other people who have installed it and gotten the same error message. As for fixing it, I do not know and I have given up helping people fix a known broken process.Originally Posted by parj
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00