I read that knoppix can use INITRAMFS..But minirt.gz isn't an archive of INITRAMFS
Hi!
I have a little question about booting of knoppix...
Well, start with theory of booting with Initrd:
- kernel load into memory initrd image
- decompress it
- execute LINUXRC (yes, must be an executable or shell file called linuxrc )
- after that or linuxrc call /sbin/init or it's called automatically, otherwise kernel panic
Pratically
- knoppix put in boot command line a line like init=/etc/init
After many test that I do, I see the param init (in this case /etc/init) it's execute only if present another param like root=/dev/ram0
I see /etc/init in INITRD of knoppix contain a small script like
Hi!Code:/linuxrc exec /sbin/init < /dev/console > /dev/console ...
I have a little question about booting of knoppix...
Well, start with theory of booting with Initrd:
- kernel load into memory initrd image
- decompress it
- execute LINUXRC (yes, must be an executable or shell file called linuxrc )
- after that or linuxrc call /sbin/init or it's called automatically, otherwise kernel panic
Pratically
- knoppix put in boot command line a line like init=/etc/init
After many test that I do, I see the param init (in this case /etc/init) it's execute only if present another param like root=/dev/ram0
I see /etc/init in INITRD of knoppix contain a small script like
I think that script and relative boot parameter is useless, infact knoppix boot correctly without "init" file in /etc and without bootparam "init=/etc/init".Code:/linuxrc exec /sbin/init < /dev/console > /dev/console ...
But..my question is: if it's useless, why is still present?
I'm forgot something?
Cheers
I read that knoppix can use INITRAMFS..But minirt.gz isn't an archive of INITRAMFS
Confirmed. Knoppix 4.0.2 will boot just fine without the "init=..."Originally Posted by Frunktz
Probably a vestige. Naturally, you're free to take in out in your own remasters.But..my question is: if it's useless, why is still present?
I'm forgot something?
Regards,
- Robert
http://www.cwelug.org
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00