partimage and dd are two candidates, so are regular copy and fixboot, fixmbr from the recoveryconsole...
Hi,
Is it possible to use Knoppix to clone a hard drive with Windows XP OS on it, to another hard drive? This would be in the case owhen someone wants to upgrade to a faster and bigger hard drive.
Any ideas?
neilsanner
partimage and dd are two candidates, so are regular copy and fixboot, fixmbr from the recoveryconsole...
Will it do the same as Norton Ghost for example?
What does Norton Ghost do?
I mean, after the clone process, will the new drive boot windows normally like the original hard drive?
Any utility that makes a bit image copy of a complete drive will result in a cloned copy. It is important that the boot sector be included in both the source and target if you have no other way to update it. This will of course result in a target drive with exactly the same partition information as the source. Further manipulation will be required to adjust partition and filesystem size. There are literally dozens of tools available, both free and not, for the operations that you are about to perform. I have heard both good and bad concerning Ghost and NTFS. Personally, I wouldn't touch a NTFS with someone elses 10 foot pole. As good as the current crop of FLOSS tools for NTFS are, all it takes is one little change pushed out by microsoft service pack to make them obsolete. This of course depends on the fact that someone at microsoft actually knows NTFS well enough to effect a transparent change.
I suggest you read up on the tools available to you, determine a list of necessary procedures and _practice_ with unimportant information first. Even the skilled make a backup copy of any critical data before partition/filesystem manipulation.
The cloning with dd is straight forward. Afterwards you need to change the SID of the computer if you are going to have clones on the same network. There is a free utility from sysinternals to do that. Ghost uses ghostwalker and there is something similar for drive image. They are purchased software. The gadget from sysinternals is freeware and changes the SID for you
Thank you everyone about dd and partimage.
Thanks a lot rcook about the SID walker, this is very valuable information!!
Humm... It took all the afternoon and a part of the night to clone a 60GB ATA hard drive with dd... It seems to me that Norton Ghost is a lot faster than that (1-2 hours)... Is it possible that it's because dd is a bit image copier? Is there a faster utility in Knoppix for cloning harddrives?
parted, partimage, g4l, QTparted ...
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS
$333.00
HP ProLiant MicroServer Gen10 8GB RAM TPS-F022
$189.99
SuperMicro SuperServer 5018A-FTN4 505-2 Intel Atom @ 2.4GHz 8GB w/ Ears
$174.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$197.99
SuperMicro CSE-836 16LFF Server X9SCL+-F Xeon E3-1220V2 3.10GHz CPU 8GB RAM
$169.99
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
UNRAID Supermicro 4U 36 Bay Storage Server Xeon 20 Core 3Ghz 256GB X540 10GBaseT
$588.00