See answer #3.
Hi
Appreciate it if somebody could translate the below into linux insturctions for me. i have tried a few things on my own but am getting stuck as kppp requires a username and password which I don't have.
"Your phone has been setup and the lines for your internet connection have been patched in.
Please configure your PC as follows,
Plug the network cable into the socket on the wall by the telephone plug.
Plug the other end into your network card in the pc and a link light (if fitted) should come on
Right click on ‘my network places’
Then click on properties
Then right click on ‘local area connection’
Then click on properties
Highlight ‘internet protocol(TCP/IP)
And click on properties
Select use the following IP address
And add the following IP Address
IP address: 192.168.0.41
Subnet mask:255.255.255.0
Gateway: 192.168.0.253
DNS1 196.25.255.34
DNS2 196.25.255.3
Any problems give us a call
Dylan"
See answer #3.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
KPPP wont be needed on LAN.
just go trough netcardconfig and ask again if you have trouble.
at the command line.......
# /sbin/ifconfig eth0 192.168.0.41 netmask 255.255.255.0 broadcast 192.168.0.255
that fixes the ip address, now route....
# /sbin/route add default gw 192.168.0.253
and now your dns..
edit /etc/resolv.conf should allready have some ip addresses but should look like this...
########
nameserver 196.25.255.34
nameserver 196.25.255.3
########
should be able to
# ping yahoo.com
if not try to ping your gateway
# ping 192.168.0.253
if that works you need to talk to your admin again
by the way i think those name server addresses are wrong.. you cannot use 255 as an address
its for broadcast only...
there are gui's for this but the shell will sometimes tell you more.
hope it helps.
Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM
$99.99
Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP
$799.99
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.18
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper EX2300-24P Poe+ Rack Mountable Ethernet Switch
$130.00
Juniper Networks EX3300-24P | 24 Port Gigabit Network Switch w/ Power cord
$53.99
Juniper Networks EX2300-C 12-Port 2XSFP Uplinks PoE+ Switch P/N: EX2300-C-12P
$299.99
Juniper QFX5100-48T-AFO 48 100M/1G/10G Base-T 6 QSFP AFO
$485.00
New Factory Sealed Juniper EX2300-48P Networks 48-Port Managed Ethernet Sealed
$499.00