--What happens with boot: ' linux vga=normal '?
Originally Posted by fatso
Everything seems to go according to plan, until I get past the initial stages and the OS should be starting up....at which point all I get is a black screen and no cd activity at all.
All the detection stages seem fine too. I tried a myriad of "cheats" from the full knoppix version, different screen resolutions, etc......and....nothing.
BTW: I have the latest version of Damn Small Linux.
Anybody got any suggestions?
Here's my hardware setup:
P4 2.53 ghz
ASUS P4PE motherboard
512 mb RAM
onboard SoundMax
Radeon 7500 64mb video
linksys nic
SAMPO AlphaScan LC monitor
Yamaha 2200E CD-R/RW
All of the above hardware works fine on the full knoppix version. I'd LOVE to be able to carry this around with me in my pocket to show non-linux users how simple it can be....help me spread the gospel, folks!
--What happens with boot: ' linux vga=normal '?
Originally Posted by fatso
thanks for your reply!
I tried your suggestion, and got the same result.
btw: typing "linux vga=normal" gives the message "Cannot find kernel"
I have to use "knoppix vga=normal"
I suspect I'm doomed due to a lack of driver support for my video...it is a "Damn small linux", after all. Can't expect mega drivers in something so scaled-down.
...unless you have other ideas?
I have EXACTLY the same problem, I think it's something to so with the P4PE as I too have one.
Does it say something about not being able to setup PCI devices due to conflicts right at the start of bootup? Mine does.
I'll get back to you if I find a way of fixing it.
Yup...I get that PCI conflict message too.Originally Posted by Colsey2001
Likewise...if I find a solution, I'll let ya know.
--Try ' knoppix vga=normal pci=biosirq '.
Originally Posted by Colsey2001
It may also be due to the kernel version used in the ISO. The DSL team recently rolled back their kernel version to keep up with older hardware. This also means that newer hardware support vanished (with the exception of some extension applications). The last version that supported the newer hardware was DSL 2.1b, which used the 2.4.31 kernel. Whereas the current release uses the 2.4.26 kernel.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Samsung 16GB 2Rx4 PC4-2400 RDIMM DDR4-19200 ECC REG Registered Server Memory RAM
$20.99
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98