I am running Knoppix with no hard drive, just a USB flash drive mounted as sda1. The drive is only 1/4 full. I can see from using Konqueror to browse files and also from the command line that all files have rwxrwxrwx permissions. I am trying to write to the USB drive but can't. If I use KEdit I get the message:
"The document could not be saved, as it was not possible to write to file:///mnt/sda1/asd.
Check that you have write access to this file or that enough disk space is available."
If I try to export bookmarks from Firefox I get not error message but the file is never written to the disk. I believe the problem started when I removed the USB drive and then replaced it during normal operations. After plugging the drive back in, I remounted it, and now I can read files fine, just can't write. I tried to unmount sda1 and then mount it again, but when I enter the command "umount /mnt/sda1" I get this message: "umount: /mnt/sda1: device is busy". Perhaps this is a clue.
Any ideas on how I can save all the work I have in memory before rebooting? Thanks!
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w
$239.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330
$299.99
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$209.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99