-
Good Day folks,
When I first downloaded Knoppix 5.0/0.1 It would not let me mount the HD and the error was something to the effect ' unable to mount fuse, access denied'. Then I checked the MD5 and SHA checksums and both wetre correct yet samre boot / access problem. I thought that potentiallyI had a bad iso so I downloaded it again this time with Bit Tornado. Sums checked again, same error. Does Fuse have to be complied or something to work on the 5x serioe disk?
I remain ~ In Service & In Health,
Captain Cautious
-
Senior Member
registered user
Hi,
It looks like you were trying to mount an ntfs partition. Would your problem look something like what was discussed in this thread?
http://www.knoppix.net/forum/viewtop...881&highlight=
Hope you find something useful from that previous discussion. Regards.
-
Same error here (except cdrom on this NEC Versa is /dev/hdb).
I don't think it's a bad disk. I ran md5sum on the ISO -- OK. After burning, ran "sudo head -c 730036224 /dev/hdc | md5sum" on a different computer -- OK. Booted it with "knoppix testcd" -- much CD activity for about 10 minutes, then booted (and failed) as normal.
Can Knoppix run diskless? I didn't see hard disk mentioned in requirements. But it sure does probe /dev/hda and finds HITACHI_DK227A-50. That disk is messed up; it had Windows installed on it. If /cdrom/KNOPPIX/modules/insmod tried to access /dev/hda, that would explain the I/O error. I tried the boot parameters myconf=/dev/hdb, home=/cdrom/knoppix.img (mount reported that /dev/hdb gets mounted on /cdrom), and noscsi. No difference.
Questions: what does that error (/cdrom/KNOPPIX/modules/insmod: I/O Error -- Can't find KNOPPIX filesystem, sorry.) mean?
How do I tell Knoppix to leave my hard disk alone? (The existence of a noswap boot parameter is a hint that by default it would use the hard disk.)
Boot param? Get screw driver and take disk drive out?
Thanks
-
Junior Member
registered user
Can Knoppix run diskless? I didn't see hard disk mentioned in requirements. But it sure does probe /dev/hda and finds HITACHI_DK227A-50. That disk is messed up; it had Windows installed on it. If /cdrom/KNOPPIX/modules/insmod tried to access /dev/hda, that would explain the I/O error. I tried the boot parameters myconf=/dev/hdb, home=/cdrom/knoppix.img (mount reported that /dev/hdb gets mounted on /cdrom), and noscsi. No difference.
Questions: what does that error (/cdrom/KNOPPIX/modules/insmod: I/O Error -- Can't find KNOPPIX filesystem, sorry.) mean?
How do I tell Knoppix to leave my hard disk alone? (The existence of a noswap boot parameter is a hint that by default it would use the hard disk.)
Boot param? Get screw driver and take disk drive out?
Thanks
-
I had this problem (see first posting)
I solved it. Read:
http://www.knoppix.net/forum/viewtop...=109468#109468
-
Junior Member
registered user
Got it Working
Haven't had a chance to post lately. But I did get the Knoppix CD and DVD both working. The CD I got it working by downloading Nero and burning it the proper way. and the DVD, was just a bad DVD. I had a friend of mine download it and burn it on his DVD player and it works great every time I reboot my computer. Thanks again. Really enjoy reading and posting here. Here's wishing everyone Happy Holidays,
Similar Threads
-
By hanktank in forum Hardware & Booting
Replies: 29
Last Post: 11-15-2006, 05:37 PM
-
By Ironfighter in forum Networking
Replies: 0
Last Post: 10-29-2006, 09:59 AM
-
By njmetalmeister in forum General Support
Replies: 2
Last Post: 12-04-2004, 11:26 PM
-
By Polo2883 in forum General Support
Replies: 1
Last Post: 11-24-2004, 12:01 AM
-
By joinf in forum General Support
Replies: 2
Last Post: 06-02-2003, 10:25 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.01
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.38
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$109.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$44.55