Results 1 to 3 of 3

Thread: "Windows did not shut down properly" - can't mount

  1. #1
    Junior Member
    Join Date
    Aug 2006
    Posts
    4

    "Windows did not shut down properly" - can't mount

    My friends' laptop stopped working so I'm using knoppix to try to recover some of the files. When I try to mount the drive I get this error:

    Code:
    root@1[mnt]# mount /dev/hda1 /mnt/hda1
    Couldn't mount device '/dev/hda1' : Operation not supported
    Windows did not shut down properly.  Try to mount volume in windows, shut down and try again.
    Mount failed.
    Problem is, she wasn't paying attention when installing what she thought was an update for office, when it was actually a new version of windows. So i'm not sure if the drive had been formatted or what, but if i could just mount it and copy a coupl eof .docs over to a jump drive that'd be perfect, then i can format her drive and install dual boot linux/windiows or somethin.

    So how can I get around this error? We can't boot her windows (let alone shut it down), blue screens of death like crazy.

  2. #2
    Senior Member registered user
    Join Date
    Jul 2006
    Posts
    117
    When you use the mount command without any options, you are asking to mount in read-write mode. For safety reasons, Knoppix does not mount NTFS partitions in read-write mode when there are problems on them (like when they did not shut down properly).

    Knoppix will mount a problem NTFS partition in read-only mode. Since you only want to mount in read-only mode to copy a few files, do this:

    mount /dev/hda1 /media/hda1 -o ro

    You can then copy the files off and do your reinstall of Windows.

    Note that it should be /media/hda1 not /mnt/hda1.

    Alternatively, you could use your Windows recovery CD to boot and do a chkdsk to fix the problems. After that Knoppix should mount.

    Regards.

  3. #3
    Junior Member
    Join Date
    Aug 2006
    Posts
    4
    Unfortunately I just got to work and can't try that. Will have to try it when I get home. I don't remember if i tried ro or not. sounds good though, as long as I can get these files off we're fine.

    Would have tried the recovery disk, but she doesn't have one. bought this crappy laptop off some other college kid (who probably stole it himself) so came with nothing but windows on it.

    why mount to media and not mnt? My nokia 770 uses media and not mnt as well... I've only been using linux for 6 months so I don't understand much of it and the stuff behind things. (i do love the power though!)

    Anyway, off topic, since i downloaded the knoppix image (took me forever!) I made a couple copies and am showing it buddies and giving them copies so they can play with linux. I get so many people bitching a bout windows when all they want to do is type in office and surf in firefox and IM in gaim. :-/ here's linux folks its easy and powerfull and doesnt screw you like windows.

    well i hope it works!

Similar Threads

  1. "only root can mount noauto,users,exec"
    By dbls in forum Hardware & Booting
    Replies: 7
    Last Post: 12-01-2009, 08:23 PM
  2. "Could Not Mount Device" - Question About Hard Dri
    By Mr K in forum Hdd Install / Debian / Apt
    Replies: 3
    Last Post: 10-05-2008, 06:37 PM
  3. Fix for WINE "Warning:...L"c:\\windows" is no
    By rharazin in forum General Support
    Replies: 2
    Last Post: 12-11-2006, 04:31 PM
  4. KNOPPIX 3.8.1 "could not mount device"
    By rioachim in forum Hardware & Booting
    Replies: 0
    Last Post: 04-17-2005, 01:47 AM
  5. Boot Problem: "mount: No such file or directory"
    By LinuxGeek in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 12-20-2003, 07:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$297.00



HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD picture

HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD

$249.99



HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES picture

HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES

$199.99



SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture

SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount

$202.49



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon

$846.19



Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears picture

Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears

$199.00



Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001 picture

Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001

$149.99



Supermicro 5018A-FTN4 Rack Server - Black picture

Supermicro 5018A-FTN4 Rack Server - Black

$125.00



1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS picture

1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS

$299.00



1U 20

1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME

$247.00