-
Run scripts from floppy at boot
Hi!
I am experimenting with a knoppix router running the live cd. I could easily remaster a cd tailored to my network configuration (I use that term loosely as I have yet to remaster a cd) but I would like it if I could make my image a little more versatile than just tailored to my immediate needs especially if at any time I need to change my network configuration. I read somewhere that it's possible to write some bash configuration scripts (such as commands to set eth0 to a certain ip address, etc.) on a floppy disk and then have those commands executed when the system boots. This would give me the flexability I'm looking for I think. I didn't write down the forums I saw that on though and can't find them again. Does anyone have some pointers on how I can do this or can perhaps point me in the direction of a howto on it? Thanks!
-
Senior Member
registered user
Just create a script called knoppix.sh on the floppy and then use knoppix floppyconfig when booting the LiveCD.
This and some other boot-options are listed at http://www.knoppix.net/wiki/Cheat_Codes, or in a file KNOPPIX/knoppix-cheatcodes.txt in your Knoppix CD/DVD.
-
Ok, I'll do that. Thanks!
-
Junior Member
registered user
I am trying to use knoppix.sh in the main image (basically the same function as putting one on floppy).
The script gets pickup and run when I boot but it not doing what I expect. This is probably because I dont know what state knoppix is in at that point and what environment the script is running in.
Since the script is outside the KNOPPIX compressed system who can I refer to, say, the /opt directory of the live system.
I want my script to untar some data into the fresh system before X starts.
This would seem to be the place to do it I just dont know the relative path to live system.
TIA.
-
Junior Member
registered user
PS , I forgot that the script that I need to run needs some user keyboard input and it would be helpful to see the console at this point.
any suggestions ?
Similar Threads
-
By sunburnt in forum Tips and Tricks
Replies: 5
Last Post: 05-28-2005, 05:39 PM
-
By sunburnt in forum General Support
Replies: 2
Last Post: 04-18-2005, 07:13 PM
-
By acer0001 in forum Customising & Remastering
Replies: 1
Last Post: 01-25-2005, 05:38 PM
-
By proto in forum General Support
Replies: 3
Last Post: 03-17-2004, 11:29 PM
-
By Dan_Netwalker in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 02-23-2003, 01:40 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00