-
Junior Member
registered user
Trying to restore Grub boot loader using chroot
In the book by Kyle Rankin: Knoppix - Pocket Reference on page 38 there is described how I could get my system starting by using the grub-configuration of Suse 10.2 installed earlyer and erroneously overwritten. However, I can not do that while running Knoppix 5.1:
First succesfully
Code:
knoppix@1[knoppix]$ sudo chroot /mnt/hdb3 grub-install /dev/hdb
But then
Code:
knoppix@1[knoppix]$ sudo chroot /mnt/hdb3 grub-install /dev/hdb
/dev/hdb: Not found or not a block device.
knoppix@1[knoppix]$ ls /dev/hdb
/dev/hdb
knoppix@1[knoppix]$
What is wrong
I have beem able to copy the /boot/grub/menu.lst for ex. to a floppy but can not put it into the right place although I try all of the shell command I know
-
Senior Member
registered user
What do you mean by "1st successfully", then...what? I don't see any difference between your two command lines.
Do you mean it worked once, then failed on later invocations?
Anyway, hdb would be the primary slave IDE disk, is this really the one you're trying to boot from?
If so, assumming /dev/hdb3 is mounted on /mnt/hdb3 (recent versions of knoppix would rather use /media/hdb3, btw)
then, from a root console (say <Alt><F1> from the live CD), try
# grub-install --root-directory /mnt/hdb3 /dev/hdb
this will re-install the grub modules to /mnt/hdb3/boot/grub, and install grub in the MBR of hdb
-
Junior Member
registered user
Originally Posted by
kirol
What do you mean by "1st successfully"
Sorry, I have to translate my thoughts from Finnish to English and the result is ...
This is what happened:
Code:
knoppix@1[knoppix]$ sudo chroot /mnt/hdb3 grub-install /dev/hdb
knoppix@1[knoppix]$
In the Unix and Linux word, if the Shell does not protest, everything is O.K. (or not O.K.)
Thank you for your kind advice. I try to proceed
-
Junior Member
registered user
I am sorry but I became confused when trying to follow the advice in the "Knoppix Pocket Reference" by Kyle Rankin. The version of Knoppix I have is 5.1. Perhaps I should use an older like 5.0?
My problem is that I can not get Suse 10.2 to start. It's root directory (/) is on partition hdb3 and there are two other Linuxes on the same hdb, one of them starting. On hda I have WindowsXP and MBR is propably there.
All this is a bit difficult for me - sorry
The list hopefully tells what I was trying to do:
Code:
knoppix@1[knoppix]$ ls -l /mnt/hdb3
lrwxrwxrwx 1 root root 11 Jan 6 20:32 /mnt/hdb3 -> /media/hdb3
knoppix@1[knoppix]$ ls -l /media/hdb3
total 0
knoppix@1[knoppix]$ sudo mount -o /dev/hdb3 /mnt/hdb3
mount: wrong fs type, bad option, bad superblock on /dev/hdb3,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
knoppix@1[knoppix]$ sudo mount -o /media/hdb3 /mnt/hdb3
mount: wrong fs type, bad option, bad superblock on /dev/hdb3,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
knoppix@1[knoppix]$ sudo grub-install --root-directory /mnt/hdb3 /dev/hda
Unrecognized option `--root-directory'
Usage: grub-install [OPTION] install_device
Install GRUB on your drive.
-h, --help print this message and exit
-v, --version print the version information and exit
--root-directory=DIR install GRUB images under the directory DIR
instead of the root directory
--grub-shell=FILE use FILE as the grub shell
--no-floppy do not probe any floppy drive
--force-lba force GRUB to use LBA mode even for a buggy
BIOS
--recheck probe a device map even if it already exists
INSTALL_DEVICE can be a GRUB device name or a system device filename.
grub-install copies GRUB images into the DIR/boot directory specfied by
--root-directory, and uses the grub shell to install grub into the boot
sector.
Report bugs to <bug-grub@gnu.org>.
knoppix@1[knoppix]$
-
Senior Member
registered user
knoppix@1[knoppix]$ sudo grub-install --root-directory /mnt/hdb3 /dev/hda
Unrecognized option `--root-directory'
Usage: grub-install [OPTION] install_device
Install GRUB on your drive.
-h, --help print this message and exit
-v, --version print the version information and exit
--root-directory=DIR install GRUB images under the directory DIR
instead of the root directory
--grub-shell=FILE use FILE as the grub shell
--no-floppy do not probe any floppy drive
--force-lba force GRUB to use LBA mode even for a buggy
BIOS
--recheck probe a device map even if it already exists
knoppix@1[knoppix]$
Sorry my bad - I wasn't under linux when replying, and should have double checked the grub syntax (I forgot the equal sign).
TryThen
# grub-install --root-directory=/media/hdb3 /dev/hda
-
Junior Member
registered user
Thank you, now it seems to work :D
If not, I will report. What I did follows:
Code:
knoppix@1[knoppix]$ sudo mount /media/hdb3
knoppix@1[knoppix]$ sudo grub-install --root-directory=/media/hdb3 /dev/hda
Due to a bug in xfs_freeze, the following command might produce a segmentation
fault when /media/hdb3/boot/grub is not in an XFS filesystem. This error is harmless and
can be ignored.
xfs_freeze: specified file ["/media/hdb3/boot/grub"] is not on an XFS filesystem
Installation finished. No error reported.
This is the contents of the device map /media/hdb3/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(hd1) /dev/hdb
(fd0) /dev/fd0
(hd2) /dev/sda
(hd0) /dev/hda
knoppix@1[knoppix]$
Similar Threads
-
By destro in forum MS Windows & New to Linux
Replies: 4
Last Post: 04-01-2007, 11:08 PM
-
By cli168 in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 06-20-2005, 03:57 AM
-
By killem in forum Hardware & Booting
Replies: 0
Last Post: 06-17-2005, 06:45 AM
-
By nxumdon in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 01-22-2004, 03:38 AM
-
By iamanewbie in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 10-24-2003, 12:59 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00
Microsel Server Tower Supermicro X10SAE E3-1275 V3 @3.5GHz 16GB 509849-001
$149.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
1U Supermicro Server X10DRU-i+ 2x Xeon Total 36 Cores 64GB 4x 10GBE-T 2PS
$299.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00