Results 1 to 4 of 4

Thread: Can't save knoppix configuration

  1. #1
    Junior Member
    Join Date
    Jan 2007
    Posts
    6

    Can't save knoppix configuration

    Hi. I'm a newbie to Knoppix, but have figured out how to save my Knoppix configuration, and have successfully done this several times. However, for no reason I can think of, it's suddenly stopped working. There's plenty of room on the hard drive for it, so that can't be a problem. The error message only tells me that it can't save my configuration for me, which isn't a lot of help.

    Anything I can do to fix it, short of wiping the configuration files and starting again, which I'm unwilling to do if there's a sensible alternative?

  2. #2
    Senior Member registered user
    Join Date
    Jan 2005
    Location
    UK
    Posts
    282
    Steve, have you installed knoppix to your hard drive, if so, after running knoppix-installer which option did you choose?

    If you choose "knopiix cd like" then you cant save any configuration as it emulates the live cd. You must start with either the beginner option or
    debian type system. If you have then at a terminal type
    dmesg | grep
    (The | is the "pipe" key not 1 or l)
    There may be info in the system log to help you use page up pge down o scroll and q to quit

  3. #3
    Junior Member
    Join Date
    Jan 2007
    Posts
    6
    Nope, I've not installed Knoppix as yet; I'm still trying to get the hang of it before I decide whether to install it (or some other version of Linux). I'm running it from the CD and attempting -- with some success -- to save my configuration (primarily Firefox extensions and settings) to hdb1 (I've got two drives on my PC) so that I can later reboot using knoppix myconfig = scan to get all my Firefox stuff back. Sometimes this works and sometimes it doesn't.

    After posting my initial question I eventually thought I'd re-start from scratch, so I rebooted in Windows, wiped all the Knoppix-related stuff and started again. Most of the time I can now save my configuration, but sometimes it just refuses to let me. Then I just reboot a few times and, eventually, I get to save the new extension I've been trying to keep.

    Most recently, I installed RealPlayer and managed to pursuade Knoppix to save it for me so I didn't have to reinstall it every time I restarted my PC. It hung around on the desktop for a bit and then vanished with neither trace nor good reason that I could tell.

    Presumably I'm doing something wrong, but I can't think of anything I'm doing differently on the occasions Knoppix doesn't want to play.

  4. #4
    Member registered user
    Join Date
    Mar 2005
    Posts
    77
    The desktop should be used for icons, small programs and notes. Especially using configuration. If you have HDD space move RealPlayer there instead. Play it from there or make an icon on the desktop.
    Also look in the knoppix/media file and 'ls' it and you'll see the HDD files like hda5 or whatever you hard drive set up is. go there (cd) and you'll see knoppix.sh and configs.tbz files. These files save your config. make a copy of each, in root, (i.e. sudo cp knoppix.sh knoppix0.sh) and now you can reconfig again. Also with kwrite make notes of what you did and when.

    Two other things to mention.
    1. Configuration to floppy will save bookmarks from Firefox/Iceweasel, as a result, many cheap & easy backups.
    2. Have you looked into persistent home? Here you can make your desktop as trashy as you want. hee hee
    (In persistent home you will have a OK box to check during the boot)

    hth any

Similar Threads

  1. Save KNOPPIX configuration in 5.3.1
    By dstarke in forum General Support
    Replies: 5
    Last Post: 08-26-2008, 02:45 PM
  2. How to save configuration in Knoppix 4.0.2
    By kpfuser in forum General Support
    Replies: 5
    Last Post: 10-10-2006, 10:06 PM
  3. Save knoppix configuration to file?
    By TP Diffenbach in forum General Support
    Replies: 0
    Last Post: 06-20-2005, 11:02 AM
  4. knoppix configuration save, and installing ddd via rpm ???
    By metafizz in forum General Support
    Replies: 0
    Last Post: 04-22-2004, 09:29 AM
  5. Where is the Save Knoppix configuration script?
    By pelican in forum General Support
    Replies: 4
    Last Post: 02-07-2004, 01:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card picture

Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card

$28.20



LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter picture

LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter

$34.95



Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller picture

Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller

$28.00



LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller picture

LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller

$22.75



Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE picture

Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE

$15.98



LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License picture

LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License

$39.95



ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs picture

ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs

$82.49



LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault picture

LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault

$39.00



ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID picture

ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID

$58.99



NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0 picture

NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0

$99.00