Step 1 is to list your hardware. From a linux terminal type
lcpci -v
and post the output
Hey I just switched to Knoppix and am really new to linux, I dont know how to find or install drivers but Knoppix does not detect my WLAN card, the only real info I have is that the card is a Broadcom 802.11b/g WLAN I dont know if there is more information that I can provide to make finding a driver easier but any help would be greatly appreciated. I hate windows but cannot really make the switch until I have my wireless up...
Thanks for all your help.
Fletch
Step 1 is to list your hardware. From a linux terminal type
lcpci -v
and post the output
I am sure this is a rediculously newbie question, trying to use that command and it says...
"bash: lcpci: command not found"
really dont know what to do at this point, it seems that the pci might refer to a mcpci card that would have wifi, but my wireless card is internal if that helps. Is there possibly another command where I can run through the hardware I have?
Thanks again for your help...
Sorry, mu mistake a typo:
the command should be:
lspci -v
this will list the pci bus on your computer.
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
RAID Enclosure - 2 Disks - 3.5" or 2.5" RAOD 0, 1, JBOD - RAID Switch on Device
$46.65
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00