Results 1 to 3 of 3

Thread: Segmentation Faulty Tree

  1. #1
    Member registered user
    Join Date
    May 2007
    Posts
    94

    Segmentation Faulty Tree

    Segmentation Faulty Tree

    while upgrading synaptic package itself from within synaptic, my internet connection failed
    and the update could not be completed. on closing the popup box that told me
    this, I find that 60+ packages are now broken. synaptic wont fix them as
    holding back is occuring all. still have 32 broken packages.

    so into the ternimal shell.

    and among other things:

    knoppix@Knoppix:~$ sudo apt-get -f install
    Reading package lists... Done
    Segmentation faulty tree... 50%
    knoppix@Knoppix:~$ sudo dpkg --configure -a
    knoppix@Knoppix:~$ sudo dpkg --configure -a
    knoppix@Knoppix:~$ sudo dpkg --configure -a
    knoppix@Knoppix:~$ sudo apt-get -f install
    Reading package lists... Done
    Segmentation faulty tree... 50%
    knoppix@Knoppix:~$

    most things still seem to function and the "tree" is said to be clean on the
    booting dialog, but the above "faulty tree shell output" dialog persists
    past booting.

    however,

    any suggestions before reinstall of knoppix commences?

  2. #2
    Member registered user
    Join Date
    May 2007
    Posts
    94

    FROM ZERO TO 61 BROCKEN PACKAGES IN UNDER 5 MINUTES

    FROM ZERO TO 61 BROCKEN PACKAGES IN UNDER 5 MINUTES
    "upgrading synaptic package itself": trying to get the latest version of synaptic.

    ok so, if I re-install and chose debian instead of knoppix from the knoppix 5.1 CD, will I still get the knoppix gprs/umts connection package in the debian install. if not, how do i get that gprs package into the debian install.

    also, I have downloaded other stuff eg. clamav packages, etc. and I do not want to have to redownload them as it takes quite a while on my gprs connection. so where is all this package stuff held and if i copy it to external hard drive can I easily copy the downloaded packages into a new debian install.

    perhaps the knop5.1 bugs documentation should include, not a recommendation not to install knoppix, but instead a recommendation not to update/upgrade things.
    I AM also WONDERING IF I HAVE THE RECORD FOR THE MOST brocken packages in the shortest time

  3. #3
    Member registered user
    Join Date
    May 2007
    Posts
    94

    well once again thanks again for all your help guys:)

    well once again thanks again for all your help guys

    got the answer from these two pages:

    http://forums.debian.net/viewtopic.p...410296f8fed415
    http://forums.debian.net/viewtopic.p...410296f8fed415

    and the winning shell output (note modifications and additions):


    knoppix@Knoppix:~$ sudo apt-get check
    Reading package lists... Done
    Segmentation faulty tree... 61%
    knoppix@Knoppix:~$ sudo apt-get check
    Reading package lists... Done
    Segmentation faulty tree... 57%
    knoppix@Knoppix:~$ sudo apt-get check
    Reading package lists... Done
    Segmentation faulty tree... 60%
    knoppix@Knoppix:~$ # rm /var/cache/apt/*.bin
    knoppix@Knoppix:~$ rm /var/cache/apt/*.bin
    rm: remove write-protected regular file `/var/cache/apt/pkgcache.bin'? y
    rm: cannot remove `/var/cache/apt/pkgcache.bin': Permission denied
    rm: remove write-protected regular file `/var/cache/apt/srcpkgcache.bin'? n
    knoppix@Knoppix:~$ sudo rm /var/cache/apt/*.bin
    knoppix@Knoppix:~$ sudo apt-get check
    Reading package lists... Done
    Building dependency tree... Done
    knoppix@Knoppix:~$ apt-get -f install
    E: Could not open lock file /var/lib/dpkg/lock - open (13 Permission denied)
    E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?
    knoppix@Knoppix:~$ sudo apt-get -f install
    Reading package lists... Done
    Building dependency tree... Done
    Correcting dependencies...Segmentation fault
    knoppix@Knoppix:~$ sudo dpkg --configure -a
    knoppix@Knoppix:~$ sudo dpkg --configure -a
    knoppix@Knoppix:~$ sudo dpkg --configure -a
    knoppix@Knoppix:~$ sudo apt-get -f install
    Reading package lists... Done
    Building dependency tree... Done
    0 upgraded, 0 newly installed, 0 to remove and 571 not upgraded.
    knoppix@Knoppix:~$


    and knoppix (5.1 faulty tree-ed edition) after a brief tumble brushes off the dust, mounts again and rides off into the sunrise, a little shaken and slightly worse for wear but booting and kicking none the less

    you can be sure he will take extra note of low hanging branches emanating from synatpic faulty trees on his next trip over the apatchy pass.

Similar Threads

  1. Faulty Printer Drivers
    By The Rockologist in forum Hardware & Booting
    Replies: 2
    Last Post: 11-27-2006, 10:46 PM
  2. kernel source tree
    By hvinelinux in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 05-05-2005, 12:23 PM
  3. faulty shutdown for 3.4
    By antskip in forum General Support
    Replies: 7
    Last Post: 05-09-2004, 10:15 AM
  4. new directory in knoppix tree
    By Alexxx in forum Customising & Remastering
    Replies: 2
    Last Post: 05-03-2004, 02:33 PM
  5. Question about Knoppix tree
    By lilliput in forum General Support
    Replies: 5
    Last Post: 02-02-2003, 07:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox

$340.00



Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD picture

Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD

$89.99



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w picture

Dell Poweredge XC730xd 3.5 2x E5-2690 v3 2.6ghz 64gb JBOD 12x Trays 2x1100w

$239.99



CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs picture

CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs

$246.67



DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY picture

DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY

$329.00



Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330 picture

Dell R730 8B LFF 2x 2.40GHz 14C Intel Xeon E5-2680 v4 32GB RAM 2x 3TB HDD HBA330

$299.99



Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU picture

Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU

$209.99



DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45

$284.00



Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU picture

Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU

$419.99