Did you configure it first? K Menu -> KNOPPIX -> Network/Internet -> ADSL/PPPOE configuration
I'm a new knoppix user from China. I tried to surf the Internet using PPPoE connection . The connection can be established successfully. But when I ping the DNS server , ppp0 doesn't transfer any packet. Knoppix only use eth0 to connect to the Internet . In MS Windows 2000 ,I can use PPPoE without any problem .
I wonder if anyone can help me.
BTW,if you don't know what I mean , you can contact me by private mesage
Did you configure it first? K Menu -> KNOPPIX -> Network/Internet -> ADSL/PPPOE configuration
Uh...It seems that you misunderstood me. I mean the configuration is correct, and the connection is established, but any of the programs didn't use the ppp0 connection.Originally Posted by SiKing
Maybe you should see this:
Code:eth0 Link encap:Ethernet HWaddr 00:10:DC:9C:53:66 inet addr:192.168.1.25 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::210:dcff:fe9c:5366/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5134 errors:0 dropped:0 overruns:0 frame:0 TX packets:318 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:365258 (356.6 KiB) TX bytes:21794 (21.2 KiB) // <--pay attention to this lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:100 (100.0 b) TX bytes:100 (100.0 b) ppp0 Link encap:Point-to-Point Protocol inet addr:172.16.47.242 P-t-P:10.10.10.10 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1480 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:54 (54.0 b) TX bytes:54 (54.0 b) // <--pay attention to this A few seconds later . eth0 Link encap:Ethernet HWaddr 00:10:DC:9C:53:66 inet addr:192.168.1.25 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::210:dcff:fe9c:5366/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6522 errors:0 dropped:0 overruns:0 frame:0 TX packets:353 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:467130 (456.1 KiB) TX bytes:22904 (22.3 KiB) // <--pay attention to this lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:100 (100.0 b) TX bytes:100 (100.0 b) ppp0 Link encap:Point-to-Point Protocol inet addr:172.16.47.242 P-t-P:10.10.10.10 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1480 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:54 (54.0 b) TX bytes:54 (54.0 b) // <--pay attention to this
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
Dell Poweredge R620 8-Bay CTO Pick your CPU & RAM Config | H710 Raid | 2x PSU
$161.99
Dell Poweredge R640 8 SFF Server No HDDs/ CPUs/ RAMs/ Cards/Fan/PSU
$419.99
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$600.00